| Issue |
Title |
File |
| No 4 (2017) |
THE ANALYSIS OF THE STRUCTURE OF ELECTROEXPLOSIVE COATINGS OF THE TiC-Ni SYSTEM ON THE DIE STEEL AFTER THE ELECTRON-BEAM TREATMENT |
(Rus)
|
|
Romanov D.A., Protopopov E.V., Bataev V.A., Kuziv E.M., Gromov V.E., Ivanov Y.F.
|
| No 1 (2016) |
THE INFLUENCE OF TECHNOLOGY FACTORS ON THE LOCAL TEMPERATURES DURING THE ULTRASONICALLY ASSISTED GRINDING |
(Rus)
|
|
Unyanin A.N.
|
| No 4 (2017) |
THE INFLUENCE OF HYDROGEN-CHARGING REGIME ON THE STRAIN HARDENING AND FRACTURE MECHANISM OF HIGH-NITROGEN STEEL |
(Rus)
|
|
Moskvina V.A., Astafurova E.G., Mayer G.G., Melnikov E.V., Galchenko N.K.
|
| No 1 (2018) |
THE BEHAVIOR OF SINTERED ALUMINUM BRONZE DURING PRESSURE TREATMENT |
(Rus)
|
|
Gurskikh A.V.
|
| No 1 (2018) |
TWO-COMPONENT COATINGS WITH A DEVELOPED SURFACE AND NANOSCALE STRUCTURE |
(Rus)
|
|
Denisova A.G., Vikarchuk A.A.
|
| No 1 (2018) |
THE STUDY OF THE ELECTROCHEMICAL BEHAVIOR OF SUPERLASTIC Ti-Nb ALLOYS IN A MODEL PHYSIOLOGICAL SOLUTION UNDER THE CYCLIC LOADING |
(Rus)
|
|
Korobkova A.A., Kazakbiev A.M., Zhukova Y.S., Prokoshkin S.D., Filonov M.R.
|
| No 1 (2018) |
THE POSSIBILITIES OF PHOTOELECTRIC CONVERTERS POWER ASCENSION BY THE MODIFICATION OF THEIR SURFACES BY SILVER NANOCLUSTERS |
(Rus)
|
|
Kuvshinov V.V., Krit B.L., Morozova N.V., Kukushkin D.Y., Savkin A.V.
|
| No 1 (2018) |
THE STUDY OF FRACTURE TOUGHNESS OF HEAT-AFFECTED ZONE OF WELDED JOINTS OF STEELS APPLIED FOR ARCTIC STRUCTURES |
(Rus)
|
|
Markadeeva A.Y., Ilyin A.V., Gusev M.A.
|
| No 1 (2018) |
THE TECHNIQUE OF CALCULATING THE PARAMETERS OF THE PROCESS AND SELECTION OF EQUIPMENT FOR HIGH-VOLTAGE CONDENSER WELDING |
(Rus)
|
|
Nescoromniy S.V., Panov Y.V.
|
| No 1 (2018) |
THE FORMATION OF NANOCRYSTALLINE MARTENSITE ON A WORKING SURFACE OF TOOL STEEL IN THE CASE OF ABRASIVE WEAR |
(Rus)
|
|
Nikiforova S.M., Filippov M.A., Ozerets N.N.
|
| No 1 (2018) |
THE APPLICATION OF TECHNOLOGICAL METHODS FOR ENHANCING THE STRENGTH OF DISSIMILAR JOINTS PRODUCED BY FRICTION STIR WELDING |
(Rus)
|
|
Rzaev R.A., Chularis A.A., Dosimov A.S., Naumov A.A., Zotov O.G.
|
| No 1 (2018) |
THE INFLUENCE OF AGGRESSIVE ENVIRONMENT AND ELECRO-IMPULSE IMPACT ON FATIGUE CHARACTERISTICS OF METALLIC GLASS |
(Rus)
|
|
Fedotov D.Y., Fedorov V.A., Yakovlev A.V., Pluzhnikova T.N., Berezner A.D.
|
| No 1 (2018) |
THE STUDY OF INFLUENCE OF MILLISECOND LASER IRRADIATION ON THE MORPHOLOGY AND CRYSTALLIZATION OF A THERMO-ACTIVATION ZONE FOR Zr-Cu-Ag-Al BULK AMORPHOUS ALLOY |
(Rus)
|
|
Shlykova A.A., Fedorov V.A., Gasanov M.F., Yakovlev A.V.
|
| No 1 (2018) |
THE INFLUENCE OF THERMAL PROCESSING ON THE STRUCTURE AND WEAR-RESISTANCE OF PERLITE-CLASS STEELS |
(Rus)
|
|
Filippov M.A., Yagudin G.А., Legchilo V.V., Estemirova S.K.
|
| No 1 (2018) |
THE INFLUENCE OF MAGNETIC FIELDS ON THE STRUCTURE AND PHYSICO-MECHANICAL PROPERTIES OF ALUMINUM |
(Rus)
|
|
Shlyarov V.V., Zagulyaev D.V., Gromov V.E.
|
| No 1 (2018) |
COMPUTER SIMULATION OF STRUCTURAL DEFECTS IN MONOCRYSTALLINE AND AMORPHOUS ALUMINUM |
(Rus)
|
|
Goncharova E.V., Konchakov R.A., Makarov A.S., Khonik V.A., Kobelev N.P.
|
| No 4 (2017) |
THE INFLUENCE OF TEMPERATURE AND TIME OF PRESSURE WELDING ON THE FORMATION OF A JOINT BETWEEN THE TITANIUM ALLOY AND Ni-2 %Cr ALLOY |
(Rus)
|
|
Ibragimova I.I., Imaev M.F., Khazgaliev R.G., Mulyukov R.R.
|
| No 4 (2017) |
THE INFLUENCE OF DIFFUSION PROCESSES ON THE SURFACE SELF-ORGANIZATION IN THE MULTILAYER FILM COATING |
(Rus)
|
|
Kostyrko S.A., Shuvalov G.M.
|
| No 4 (2017) |
SPECIAL ASPECTS OF HEAT TREATMENT OF STEELS FOR THE PRODUCTION OF HOT DEFORMATION STAMPS |
(Rus)
|
|
Krylova S.E., Romashkov E.V., Pilipchuk G.P.
|
| No 4 (2017) |
THE STRUCTURE, PHASE COMPOSITION AND MICROMECHANICAL CHARACTERISTICS OF HIGH-NITROGEN AUSTENITIC STEEL AFTER HIGH-TEMPERATURE AGEING AND DEFORMATION BY SHEAR UNDER PRESSURE |
(Rus)
|
|
Makarov A.V., Luchko S.N., Volkova E.G., Osintseva A.L., Litvinov A.V.
|
| No 4 (2017) |
THE INFLUENCE OF PRELIMINARY DEFORMATION TREATMENT ON THE HARDENING AND QUALITY OF THE NITRIDED SURFACE OF AUSTENITE STAINLESS STEEL |
(Rus)
|
|
Makarov A.V., Samoylova G.V., Mamaev A.S., Osintseva A.L., Savray R.A.
|
| No 4 (2017) |
THE TECHNOLOGIES OF HALOBUTYL RUBBERS PRODUCTION. PART 1. THE TECHNOLOGY OF BUTYL RUBBER HALOGENATION IMPLEMENTED IN THE MANUFACTURING INDUSTRY |
(Rus)
|
|
Orlov Y.N., Ostapenko G.I.
|
| No 4 (2017) |
THE TECHNOLOGIES OF HALOBUTYL RUBBER PRODUCTION. PART 2. ALTERNATIVE TECHNOLOGIES OF BUTYL RUBBER HALOGENATION |
(Rus)
|
|
Orlov Y.N., Ostapenko G.I.
|
| No 4 (2017) |
THE INFLUENCE OF VARIOUS MODES OF POST-WELD HEAT TREATMENT ON THE STRUCTURAL AND MECHANICAL HETEROGENEITY OF WELDED JOINTS OF MEDIUM ALLOY STEELS PRODUCED BY ROTATIONAL FRICTION WELDING |
(Rus)
|
|
Priymak E.Y., Stepanchukova A.V., Tryakina N.Y., Fot A.P., Atamashkin A.S.
|
| No 4 (2017) |
THE STRUCTURE AND PROPERTIES OF SURFACING SURFACE IRRADIATED BY THE INTENSIVE LOW-ENERGY PULSED ELECTRON BEAM |
(Rus)
|
|
Rubannikova Y.A., Gromov V.E., Kosinov D.A., Kormyshev V.E.
|
| No 4 (2017) |
RAPIDLY QUENCHED AMORPHOUS-CRYSTALLINE Ti50Ni25Cu25 ALLOY RIBBONS WITH THE TWO-WAY SHAPE MEMORY EFFECT FOR THE MICROMECHANICAL DEVICES |
(Rus)
|
|
Sitnikov N.N., Khabibullina I.A., Shelyakov A.V.
|
| No 4 (2017) |
THE INFLUENCE OF FRICTIONAL THEATMENT ON THE MICROMECHANICAL PROPERTIES OF NiCrBSi COATING PRODUCED BY LASER CLADDING |
(Rus)
|
|
Soboleva N.N., Makarov A.V., Malygina I.Y.
|
| No 4 (2017) |
THE ASSESSMENT OF IMPACT OF CARBONITRIDING ON THE LOCATION OF COLD-BRITTLENESS THRESHOLD IN THE MEDIUM-CARBON ALLOY STEELS |
(Rus)
|
|
Stepanchukova A.V., Priymak E.Y., Yakovleva I.L., Tereshchenko N.A., Chirkov E.Y.
|
| No 4 (2017) |
THE STUDY OF COPPER POWDERS OF VARIOUS MORPHOLOGICAL FORMS IN TEMPERATURE FIELDS |
(Rus)
|
|
Borgardt T.A., Gryzunova N.N.
|
| No 4 (2017) |
THE INFLUENCE OF HYDROGEN CHARGING ON THE MECHANICAL PROPERTIES AND FRACTURE MODE OF Cr17Ni13Mo3 AUSTENITIC STAINLESS STEEL |
(Rus)
|
|
Fortuna A.S., Moskvina V.A., Mayer G.G., Melnikov E.V., Astafurova E.G.
|
| No 4 (2017) |
STRESS-STRAIN STATE OF AN ELASTIC BODY WITH A NEARLY CIRCULAR INCLUSION INCORPORATING INTERFACIAL STRESS |
(Rus)
|
|
Vakaeva A.B.
|
| No 4 (2017) |
THE INFLUENCE OF THERMAL TREATMENT ON THE MAGNETIC PROPERTIES OF AMORPHOUS METALLIC ALLOYS |
(Rus)
|
|
Yakovlev A.V., Fedorov V.A., Pluzhnikova T.N., Fedotov D.Y., Berezner A.D.
|
| No 4 (2017) |
THE COMPUTER MODELLING OF FUNCTIONAL-MECHANICAL BEHAVIOR OF POROUS SHAPE MEMORY ALLOY SAMPLES |
(Rus)
|
|
Volkov A.E., Evard M.E., Yaparova E.N.
|
| No 4 (2017) |
THE FRAGMENTED STRUCTURE OF COPPER IN TEMPERATURE FIELDS |
(Rus)
|
|
Gryzunov A.M., Vikarchuk A.A.
|
| No 3 (2017) |
THE STUDY OF THE PROCESS OF MECHANICAL ALLOYING OF ALUMINUM BY NANO-DIMENSIONAL ALLOTROPIC MODIFICATIONS OF CARBON |
(Rus)
|
|
Vetkasov N.I., Kapustin A.I., Sapunov V.V.
|
| No 3 (2017) |
THE APPLYING OF HIGH-PERFORMANCE MACHINING METHOD FOR CUTTING OF STRUCTURAL STEELS |
(Rus)
|
|
Vilkina M.V.
|
| No 3 (2017) |
THE INFLUENCE OF INTENSIVE PLASTIC DEFORMATION ON THE STRUCTURE AND PHYSICAL AND MECHANICAL PROPERTIES OF HIGH-CARBON STEEL |
(Rus)
|
|
Goruleva L.S., Gorkunov E.S., Zadvorkin S.M., Makarov A.V.
|
| No 3 (2017) |
MATHEMATICAL MODELING OF CAR TUNING |
(Rus)
|
|
Doronkin V.G., Kolacheva N.V.
|
| No 3 (2017) |
THE TECHNOLOGY OF PRODUCING AND CERTIFICATION OF Ti-Nb-Zr ALLOYS PERMEABLE FOAM MATERIALS OF MEDICAL PURPOSE |
(Rus)
|
|
Kazakbiev A.M., Korobkova A.A., Sheremetyev V.A., Dubinskiy S.M., Prokoshkin S.D.
|
| No 3 (2017) |
REGARDING THE SPECIAL ASPECTS OF CRACKS GROWTH IN A VISCO-ELASTIC MATERIAL WITH THE EXTENDED HIERARCHIC STRUCTURE |
(Rus)
|
|
Kalachev V.A., Panfilov P.E., Zaytsev D.V.
|
| No 3 (2017) |
SPECIAL ASPECTS OF FORMATION OF Ti-Nb SYSTEM β-ALLOYS BY THE MECHANICAL ALLOYING IN A HIGH-ENERGY BALL MILL |
(Rus)
|
|
Kovalevskaya Z.G., Khimich M.A., Korchagin M.A., Sharkeev Y.P.
|
| No 3 (2017) |
MAGNESIUM STRUCTURE AND TEXTURE AFTER THE LOW-TEMPERATURE MEGAPLASTIC DEFORMATION |
(Rus)
|
|
Komkova D.A., Volkov A.Y.
|
| No 3 (2017) |
THE INFLUENCE OF PROLONGED ANNEALING ON THE STRUCTURE AND PROPERTIES OF THE DEFORMED Cu-8at.%Pd ALLOY |
(Rus)
|
|
Kostina A.E., Volkov A.Y.
|
| No 3 (2017) |
ENGINEERING SUPPORT OF PRODUCTION OF HIGH-ACCURACY COMPONENT ASSEMBLIES |
(Rus)
|
|
Nazaryev A.V., Bochkarev P.Y.
|
| No 3 (2017) |
THE INFLUENCE OF ULTRASONIC MECHANICAL ACTIVATION ON CRYSTALLIZATION KINETICS AND MARTENSITIC TRANSFORMATIONS OF TiNi-BASED AMORPHOUS ALLOYS |
(Rus)
|
|
Niapomniashchaya V.V., Rubanik V.V.
|
| No 3 (2017) |
THE INFLUENCE OF PLASTIC DEFORMATION OF TiNi WIRE ON THE THERMOKINETIC EMF |
(Rus)
|
|
Rubanik Jr. V.V., Lesota A.V.
|
| No 3 (2017) |
THE INFLUENCE OF TEMPERATURE OF NANOSTRUCTURING FRICTIONAL TREATMENT ON THE STRUCTURAL-PHASE STATE, HARDENING AND SURFACE QUALITY OF AUSTENITIC CHROMIUM-NICKEL STEEL |
(Rus)
|
|
Skorynina P.A., Makarov A.V., Yurovskikh A.S., Osintseva A.L.
|
| No 3 (2017) |
FEATURES OF FORMATION AND GROWTH OF THE NEDLE-LIKE MICROSCRYSTALS IN THE SILVER ELECTRODEPOSITION PROCESS |
(Rus)
|
|
Abdugaffarova K.K., Dorogov M.V., Aifantis E.C.
|
| No 3 (2017) |
DEFORMATION RELIEF IS THE REFLECTION OF INTERNAL PROCESSES DURING PLASTIC DEFORMATION OF SINGLE CRYSTALS |
(Rus)
|
|
Alfyorova E.A., Lychagin D.V.
|
| No 2 (2017) |
INHIBITING PROPERTIES OF CONJUGATED UNSATURATED KETONES IN THE ACIDIC MEDIUM |
(Rus)
|
|
Glukhov P.A., Kalinnikov N.A.
|
| No 2 (2017) |
THE ALGORITHM FOR OPTICAL METHOD OF CONTROL OF THE CYLINDRICAL SMOOTHER WORKING SURFACE WEAR |
(Rus)
|
|
Lukyanov A.A., Bobrovskiy N.M., Melnikov P.A., Bobrovskiy I.N., Levitskikh O.O., Sevostyanov A.S.
|
| No 2 (2017) |
DRYING OF ASH FROM COMBINED HEAT AND POWER PLANT (CHPP) IN THE MULTICHAMBER FLUIDIZED BED DRYER |
(Rus)
|
|
Natareev S.V., Nikiforova T.E., Golyakov R.E., Sirotkin A.A.
|
| No 2 (2017) |
OPTIMIZATION OF MECHANICAL ANISOTROPY OF COVER SHEETS TO MINIMIZE THE POLYTHICKNESS WHEN STRETCH-WRAP FORMING |
(Rus)
|
|
Surudin S.V., Erisov Y.A., Petrov I.N.
|
| No 2 (2017) |
THE DEVELOPMENT AND RESEARCH OF METHODOLOGY OF CORRECTION OF MECHANICAL TREATMENT MODE IN THE CONDITIONS OF UNCERTAINTY OF TECHNOLOGICAL INFORMATION |
(Rus)
|
|
Unyanin A.N., Finageev P.R.
|
| No 2 (2017) |
THE CALCULATION OF OPTIMAL DIAMETERS OF HYDRAULIC NETWORK USING THE CONVECTION-DIFFUSION METHOD OF CONSTRAINED MINIMIZATION |
(Rus)
|
|
Fedorov V.V., Afanasyev S.V.
|
| No 2 (2017) |
NEW ENGINEERING SOLUTIONS FOR PRODUCING HIGH-PRESSURE CARBON DIOXIDE |
(Rus)
|
|
Afanasyev S.V., Shevchenko Y.N., Sergeev S.P.
|
| No 2 (2017) |
THE REDUCTION OF ENERGY CONSUMPTION WHEN PRODUCING LIQUID CARBON DIOXIDE AT THE AMMONIA UNITS |
(Rus)
|
|
Afanasyev S.V., Shevchenko Y.N., Sergeev S.P.
|
| No 2 (2017) |
MATHEMATICAL MODELING OF THERMAL STRESS PROCESS OF FLAT GRINDING OF WORKPIECES USING COMPOSITE WHEELS |
(Rus)
|
|
Vetkasov N.I., Krupennikov O.G., Ulitin S.I.
|
| No 1 (2017) |
THE METHODOLOGY OF ASSESSMENT OF ECOLOGICAL RISKS IN OIL AND GAS PRODUCING AND CHEMICAL COMPLEXES |
(Rus)
|
|
Gorina L.N., Danilina N.E., Freze T.Y., Kolacheva N.V.
|
| No 1 (2017) |
SIMULATION OF PARAMETERS OF CYLINDER CONTACT AREA WHEN CLADDING WITH FLEXIBLE TOOL |
(Rus)
|
|
Zotov A.V., Semenchenko N.V., Galiev I.R.
|
| No 1 (2017) |
ABOUT COMPLEX FORMATION IN THE “CHROMIC SULFATE (III) – ALUMINUM SULFATE – TITANYL SULFATE – WATER” SYSTEM |
(Rus)
|
|
Troshina M.A.
|
| No 1 (2017) |
THE STUDY OF INTERRELATIONSHIP OF IONIZATION CURRENT AND MAXIMUM INDICATED PRESSURE DURING THE COMBUSTION OF HYDROGEN RICH GASOLINE-AIR MIXTURE |
(Rus)
|
|
Shaikin A.P., Ivashin P.V., Deryachev A.D.
|
| No 1 (2017) |
FRACTURING BEHAVIOR OF LUBRICATING-COOLING FLUID (LCF) IN THE CONTACT AREA OF THE TOOL AND THE WORKPIECE |
(Rus)
|
|
Shchipanov A.V.
|
| No 4 (2016) |
THE APPLICATION OF DIGITAL IMAGE CORRELATION METHOD FOR MEASURING LOCALIZED DEFORMATION ON THE EXAMPLE OF TWINNING OF MAGNESIUM AND SHEAR BANDS IN METALLIC GLASS |
(Rus)
|
|
Seleznev M.N., Vasiliev E.V., Vinogradov A.Y.
|
| No 4 (2016) |
THE STUDY OF HYDROGEN INFLUENCE ON THE IRREGULARITY OF BEHAVIOR OF COMPRESSED NATURAL GAS COMBUSTION IN INTERNAL-COMBUSTION ENGINES AT NO-LOAD CONDITIONS |
(Rus)
|
|
Smolenskiy V.V., Smolenskaya N.M., Pavlov D.A.
|
| No 4 (2016) |
THE DEFINITION OF INITIAL AND FINAL ADJUSTMENTS OF WORM GEAR CUTTERS WHEN PROCESSING HELICAL WHEELS |
(Rus)
|
|
Demidov V.V.
|
| No 4 (2016) |
ACTUAL MINIMAL LENGTH OF ENTRY AND EXIT PARTS OF THE WORM GEAR CUTTERS WHEN PROCESSING HELICAL WHEELS |
(Rus)
|
|
Demidov V.V.
|
| No 4 (2016) |
MATHEMATICAL MODELS OF DEPENDENCE OF JOINTS’ QUALITY ON THE TECHNOLOGY FACTORS WHEN BRAZING IN ZINC VAPORS |
(Rus)
|
|
Krasnopevtsev A.Y., Safonov M.V., Krasnopevtseva E.A., Maltsev S.A.
|
| No 4 (2016) |
NANOSTRUCTURING COMBINED FRICTIONAL-THERMAL TREATMENT OF 12KH18N10T AUSTENIC STEEL |
(Rus)
|
|
Makarov A.V., Skorynina P.A., Volkova E.G., Osintseva A.L.
|
| No 4 (2016) |
ION EXCHANGE IN CONTINUOUS PULSED COLUMN |
(Rus)
|
|
Natareev S.V., Bykov A.A., Zakharov D.E.
|
| No 3 (2016) |
ENGINEERING AND ECONOMIC EVALUATIONS OF VARIOUS METHODS OF JOINING CAR BODY PARTS |
(Rus)
|
|
Krasnopevtsev A.Y., Gurenkov I.A., Matosov K.A., Krasnopevtseva I.V.
|
| No 3 (2016) |
THE STUDY OF GEOMETRY AND THE APPLICATION AREA OF CUTTING TOOL WITH Capto SHANK |
(Rus)
|
|
Reznikov L.A., Kasimov A.T., Bochkareva I.O.
|
| No 2 (2016) |
THE STUDY OF PLASTIC DEFORMATION NONUNIFORMITY IN D1 ALLOY USING THE METHOD OF DIGITAL SPECKLE IMAGES CORRELATION |
(Rus)
|
|
Barannikova S.A., Li Y.V., Bochkareva A.V., Zuev L.B.
|
| No 2 (2016) |
SAFETY CONTROL OF MACHINE BUILDING PRODUCTION IN THE CONTEXT OF TECHNICAL REGULATION REFORM |
(Rus)
|
|
Gorlenko O.A., Vavilin Y.A.
|
| No 2 (2016) |
THE INFLUENCE OF CATHODE ACTIVATION ON THE EVOLUTION OF THE SURFACE MORPHOLOGY OF CRYSTALS FORMED IN THE PROCESS OF ELECTROCHEMICAL CRYSTALLIZATION OF CUPRUM |
(Rus)
|
|
Gryzunov A.M.
|
| No 2 (2016) |
CUPRUM-ZINC COATING WITH HIGH SPECIFIC SURFACE PRODUCED BY METAL ELECTRODEPOSITION METHOD |
(Rus)
|
|
Denisova A.G.
|
| No 2 (2016) |
THE MODEL OF QUANTITATIVE ASSESSMENT OF TECHNICAL SYSTEM RELIABILITY |
(Rus)
|
|
Luzhaeva E.M., Yagovkina Е.N., Freze T.Y.
|
| No 2 (2016) |
THE IMPLEMENTATION OF ENERGY EFFICIENCY TECHNOLOGIES ON THE MODERN CNC MACHINES BY USING THE AUTOMATICALLY REPLACEABLE MODULES ON THE EXAMPLE OF LASER PROCESSING |
(Rus)
|
|
Ogin P.A., Levashkin D.G.
|
| No 2 (2016) |
THE INFLUENCE OF LASER EMISSION AND BEAM VELOCITY ON THE GEOMETRY OF FLASHING ZONE DURING LASER HARDENING OF 40H STEEL |
(Rus)
|
|
Ogin P.A., Merson D.L., Yaresko S.I.
|
| No 2 (2016) |
THERMOELASTIC MARTENSITE TRANSFORMATIONS IN SINGLE-CRYSTALS OF Fe–Ni–Co–Al–Nb(B) FERRUM-BASED ALLOYS AT THE LONG TIME OF AGENING |
(Rus)
|
|
Panchenko M.Y., Kuts O.A., Kireeva I.V., Chumlyakov Y.I.
|
| No 2 (2016) |
THE DEVELOPMENT OF DYNAMIC MODEL OF THE COLUMN OF HORIZONTAL MULTI-AXIS BORING MACHINE WITH HYDRAULIC JACKS COMPLEX AS THE CONTROL TARGET |
(Rus)
|
|
Rubtsov M.A.
|
| No 2 (2016) |
DAMPING OF AUTOVIBRATIONS OF FLEXIBLE SHAFT EMBODIED IN CENTERS WHEN TURNING BY MULTIPLE-TOOL HEAD WITH VARIABLE TOOTH PITCH |
(Rus)
|
|
Svinin V.M., Prokhorov A.Y.
|
| No 1 (2016) |
THE INFLUENCE OF STRONG MAGNETIC FIELD ON THE PROCESSES OF RECOVERY IN CRYSTALLINE IRON-BASE ALLOYS AND CRYSTALLIZATION IN AMORPHOUS IRON-BASE ALLOYS |
(Rus)
|
|
Milyutin V.A.
|
| No 1 (2016) |
IMPROVEMENT OF THE EFFICIENCY OF LASER WELDING OF THE INTRAMEDULLARY EXTENSIBLE ROD ELEMENTS THROUGH OPTIMIZING RIB GEOMETRY |
(Rus)
|
|
Ogin P.A., Boychenko O.V., Protsenko O.N., Krishtal M.M.
|
| No 1 (2016) |
METHODOLOGY OF ANALYSIS OF STRENGTH DEFORMATIONS OF MACHINES CARRYING SYSTEMS DURING CONTACT INTERACTIONS OF |
(Rus)
|
|
Rubtsov M.A.
|
| No 1 (2016) |
THERMAL PHENOMENA DURING INTERNAL GRINDING WITH SLIDING FEED |
(Rus)
|
|
Salov P.M., Salova D.P., Vinogradova T.G., Saikin S.S.
|
| No 1 (2016) |
THE INFLUENCE OF HEAT RELEASE AND THE COMBUSTION CHAMBER SHAPE ON THE CONCENTRATION OF UNBURNED HYDROCARBONS IN THE EXHAUST GASES |
(Rus)
|
|
Shaikin A.P., Galiev I.R.
|
| No 1 (2016) |
INTRODUCTION OF TECHNOLOGY OF ELECTROLYTIC-PLASMA POLISHING OF METAL GOODS |
(Rus)
|
|
Volenko A.P., Boychenko O.V., Chirkunova N.V.
|
| No 1 (2016) |
EXTENSIBLE SELF-LOCKING INTRAMEDULLARY OSTEOSYNTHESIS ROD |
(Rus)
|
|
Krishtal M.M., Kotelnikov G.P., Protsenko O.N., Boychenko O.V., Ogin P.A.
|
| No 4 (2015) |
METHODOLOGY OF THE PERFORMANCE OF LABORATORY EXPERIMENT ON THE STUMPS CLEANING USING THE WORKING BODY OF A PATCH-MAKER |
(Rus)
|
|
Pozdnyakov E.V.
|
| No 4 (2015) |
MECHANICAL BEHAVIOR OF 04H20N6G11M2AFB NITROGEN AUSTENIC STEEL DURING STATIC TENSION WITHIN THE TEMPERATURE INTERVAL FROM −70 TO +140 ºС |
(Rus)
|
|
Savray R.A., Makarov A.V., Gorkunov E.S., Pecherkina N.L., Rogovaya S.A., Osintseva A.L., Kalinin G.Y., Mushnikova S.Y.
|
| No 4 (2015) |
14M MARTENSITE FORMATION IN MICROCRYSTALLINE NI-AL ALLOYS |
(Rus)
|
|
Valiullin A.I., Sagaradze V.V., Kataeva N.V., Voronin V.I.
|
| No 4 (2015) |
THE INFLUENCE OF EQUAL CHANNEL ANGULAR PRESSING ON THE STRUCTURE AND MECHANICAL PROPERTIES OF MAGNESIUM Mg-Zn-Ca ALLOYS |
(Rus)
|
|
Vinogradov A.Y., Vasiliev E.V., Linderov M.L., Merson D.L., Rzhevskaya E.O.
|
| No 4 (2015) |
TECHNICAL PARAMETERS OPTIMIZATION WHILE SOLVING ENGINEERING PROBLEMS |
(Rus)
|
|
Gordeev A.V., Loginov N.Y.
|
| No 4 (2015) |
THE APPLICATION OF THIN POLYMERIC COATINGS WHEN PRODUCING AND REWORKING MACHINE PARTS |
(Rus)
|
|
Kravtsova E.A., Feskov S.A.
|
| No 4 (2015) |
THE INFLUENCE OF ELECTROLYTIC HYDROGENATION CURRENT DENSITY ON THE CONCENTRATION OF DIFFUSIVE ACTIVE HYDROGEN IN S235JR LOW-CARBON STEEL |
(Rus)
|
|
Merson E.D., Poluyanov V.A., Merson D.L., Vinogradov A.Y.
|
| No 4 (2015) |
RESEARCH AND DEVELOPMENT OF EVALUATION CRITERIA OF MOTOR VEHICLES ACOUSTIC COMFORT |
(Rus)
|
|
Krasnov A.V.
|
| No 4 (2015) |
EVALUATION OF FRACTURES AND STRUCTURES MORPHOLOGY IN CONSTRUCTION STEELS USING THE COMPUTERIZED PROCEDURES |
(Rus)
|
|
Kudrya A.V., Sokolovskaya E.A., Le H., Trachenko V.A., Skorodumov S.V., Papina K.B., Chinh H.
|
| No 4 (2015) |
THE ANALYSIS OF EMISSION CHARACTERISTICS OF GAS PRODUCER COMBUSTION PRODUCTS |
(Rus)
|
|
Kuzmin V.A., Zagray I.A.
|
| No 4 (2015) |
THE IMPROVEMENT OF MICROMECHANICAL PROPERTIES AND WEAR RESISTANCE OF CHROME-NICKEL LASER COATING USING THE FINISHING FRICTION TREATMENT |
(Rus)
|
|
Makarov A.V., Soboleva N.N., Savray R.A., Malygina I.Y.
|
| 1 - 100 of 165 Items |
1 2 > >>
|
