SAFETY CONTROL OF MACHINE BUILDING PRODUCTION IN THE CONTEXT OF TECHNICAL REGULATION REFORM


Cite item

Full Text

Abstract

The paper considers the issues of production safety control in the context of reforming of the technical regulation system in Russia. In machine building, safety control of machine building products is a critical task, which is caused by the requirements of technical regulations (provisions of standards or conditions of contracts. The authors carried out the analysis of literature on the development of systems of the products and services safety management, systems of the food products safety management with the HACCP elements, systems of traffic safety management (in the sphere of rail transport traffic safety at the Joint Stock Company “Russian Railways”), as well as the systems of information security management.

The paper considers the issues of machine building products safety control based on the development of systems of its safety management including the subsystems of organization quality management. The developed system allows, on one side, ensuring products and services safety, and on the other side, is the important evidential material when declaring the compliance of the products and services with the specified safety requirements. The authors analyzed the steps of development of the products safety management system, which are the following sequence of actions: scheduling, system designing, system implementation, system qualification process, determination and implementation of corrective actions according to the results of the system analysis by the top management.

The authors present the developed model of the machine building products safety management system, as well as identify the main processes of the system of machine building products safety management: safety control at the stage of designing, safety control at the stage of pre-production, safety control at the stage of production.

About the authors

Oleg Aleksandrovich Gorlenko

Bryansk State Technical University, Bryansk

Author for correspondence.
Email: goa-bgtu@mail.ru

Doctor of Sciences (Engineering), Professor, Head of department of quality of education in higher education institution

Россия

Yaroslav Aleksandrovich Vavilin

Bryansk State Technical University, Bryansk

Email: vavilin@bk.ru

senior lecturer of Chair “Quality Management, Standardization and Metrology”

Россия

References

  1. RF. Federal Law “On technical regulation” of December 27, 2002 no. 184-FZ (as amended of November 28, 2015). (In Russian).
  2. Makhutov N.A., Gadenin M.M. Safety provision: issues of quality and technical regulation. Standarty i kachestvo, 2007, no. 6, pp. 31–36.
  3. Versan V.G., Aronov I.Z., Rakov A.V. Crisis and actual issues of technical regulation. Promyshlennaya politika v Rossiyskoy Federatsii, 2009, no. 9, p. 19.
  4. Versan V.G. Timeline of achievement: standardization, quality, conformity validation, technical regulation. Sertifikatsiya, 2015, no. 2, pp. 2–7.
  5. Gareeva Yu.R., Shkaeva N.A., Salimova D.F. Technical regulation within the territory of the Customs Union. Molodoy ucheniy, 2015, no. 3, pp. 115–117.
  6. Urgant O.V. Lawlessness in technical regulation. Kontrol’ kachestva produktsii, 2015, no. 5, pp. 30–34.
  7. Duhno N., Vasiliev F. Issues of legislation regulatory in development and application of technical regulations in the Russian Federation. Krymskiy nauchniy vestnik, 2015, no. 4-3, pp. 38–57.
  8. Makarov A.I. Technical regulation in the Russian Federation based on international codes and standards. Kommercheskoe pravo. Nauchno-prakticheskiy zhurnal, 2015, no. 1, pp. 69–75.
  9. Efremova E.N. Food safety management system – НАССР. Forum. Seriya: Gumanitarnye i ekonomicheskie nauki, 2014, no. 1, pp. 19–22.
  10. Satsuta A.E. Introduction of HACCP system at the Russian enterprises. Gaudeamus igitur, 2015, no. 4, pp. 43–46.
  11. Tarasova E.Yu., Petrova E.I. Food safety management system based on HACCP principles. Sbornik statey mezhdunarodnoy nauchno-prakticheskoy konferentsii “Nauka, obrazovanie, proizvodstvo”. Bryansk, 2015, pp. 75–78.
  12. Opatunji O., Odhianndo F. Improving sachet water quality – does Hazard Analysis and critical Control Point apply?. Water and Environment Journal, 2014, no. 28, pp. 23–30.
  13. Wallace C.A., Sperber W.H., Mortimore S.E. Food Safety for the 21st Century: Managing HACCP and Food Safety throughout the Global Supply Chain. UK, Wiley-Blackwell, 2010. 352 p.
  14. Skorokhodov D.A., Starichenkov A.L. Model of rail safety management. Nauka i transport, 2012, no. 3, pp. 38–41.
  15. Zamyshlyaev A.M., Ermakov A.O., Novozhilov E.O. Method of control of reliability and functional safety of rail transport facilities based on the risks evaluation. Nadezhnost’, 2012, no. 4, pp. 149–157.
  16. Skiba V.Yu., Kurbatov V.A. Rukovodstvo po zashchite ot vnutrennikh ugroz informatsionnoy bezopasnosti [Guidance on protection from internal threat for information security]. St. Petersburg, Piter Publ., 2008. 320 p.
  17. Korneev I.R., Belyaev A.V. Informatsionnaya bezopasnost’ predpriyatiya [Enterprise IT security]. St. Petersburg, BKhV-Peterburg Publ., 2003. 752 p.
  18. Raykova N.O. The newest requirements to the systems of information security management. Molodezhniy nauchno-tekhnicheskiy vestnik, 2015, no. 4, p. 32.
  19. Gorlenko O.A., Vavilin Ya.A. Safety management system of machine building enterprises. Vestnik Bryanskogo gosudarstvennogo tekhnicheskogo universiteta, 2013, no. 3, pp. 161–166.
  20. Vavilin Ya.A., Gorlenko O.A. Enhancement of engineering production quality on the basis of safety parameters provision. Vestnik Rybinskoy gosudarstvennoy aviatsionnoy tekhnologicheskoy akademii im. P.A. Solovyeva, 2015, no. 1, pp. 112–118.

Supplementary files

Supplementary Files
Action
1. JATS XML
Download

Copyright (c)



This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies