| Issue |
Title |
File |
| No 4 (2021) |
Specific features of structural-phase transformations and hardening during shear deformation under pressure of high-nitrogen steel with austenitic-ferritic structure of metal matrix |
(Rus)
|
|
Luchko S.N., Makarov A.V., Volkova E.G.
|
| No 4 (2021) |
Combination of circular motions in machines and mechanisms |
(Rus)
|
|
Popov I.P.
|
| No 4 (2021) |
Special aspects of arc welding of a laminated corrosion-resistant material |
(Rus)
|
|
Rozen A.E., Kireev S.Y., Dub A.V., Safonov I.A., Makarova E.A., Rozen A.A., Isakov E.G., Korolkov A.O.
|
| No 4 (2021) |
The study of temperatures in a tungsten electrode at reverse polarity arcing |
(Rus)
|
|
Sidorov V.P., Sovetkin D.E.
|
| No 4 (2021) |
Effect of nanostructuring frictional treatment on micromechanical and corrosion properties of stable austenitic chromium-nickel steel |
(Rus)
|
|
Skorynina P.A., Makarov A.V., Berezovskaya V.V., Merkushkin E.A., Chekan N.M.
|
| No 4 (2021) |
The influence of boron carbide additive on the structure and hardness of a nickel-based coating |
(Rus)
|
|
Starikova U.S., Soboleva N.N., Makarov A.V., Kharanzhevsky E.V.
|
| No 4 (2021) |
Optimal scheme of laser hardening of a tool wedge tip |
(Rus)
|
|
Yaresko S.I., Balakirov S.N.
|
| No 4 (2021) |
The study of mechanical deformation resistance of α-Ga2O3 epitaxial layers using the nanoindentation technique |
(Rus)
|
|
Guzilova L.I., Grashchenko A.S., Nikolaev V.I.
|
| No 4 (2021) |
The influence of method and temperature of ion-plasma treatment on physical and mechanical properties of surface layers in austenitic stainless steel |
(Rus)
|
|
Zagibalova E.A., Moskvina V.A., Mayer G.G.
|
| No 3 (2021) |
The influence of postweld tempering on mechanical behavior of friction welded joints of 32G2 and 40HN steels under high-cycle fatigue |
(Rus)
|
|
Atamashkin A.S., Priymak E.Y.
|
| No 3 (2021) |
Identification of acoustic emission sources in a polimer composite material under the cycle tension loading |
(Rus)
|
|
Bryansky A.A., Bashkov O.V.
|
| No 3 (2021) |
Epoxy antifriction coatings filled with the rice husks ash treated with surfactants |
(Rus)
|
|
Valeeva A.R., Gotlib E.M., Yamaleeva E.S.
|
| No 3 (2021) |
The influence of elemental powder raw material on the formation of the porous frame of Ti3AlC2 MAX-phase when obtaining by the SHS method |
(Rus)
|
|
Davydov D.M., Umerov E.R., Latukhin E.I., Amosov A.P.
|
| No 3 (2021) |
Determination of sustainable levels of design alternatives selection in the workflow cap system |
(Rus)
|
|
Mitin S.G., Bochkarev P.Y., Shalunov V.V., Razmanov I.A.
|
| No 3 (2021) |
Characteristics of a gradient material based on Ni-Cr stainless steel and H20N80 alloy produced by electron-beam 3D-printing |
(Rus)
|
|
Moskvina V.A., Melnikov E.V., Zagibalova E.A.
|
| No 3 (2021) |
The research of aging and mechanical properties of nanostructural titanium |
(Rus)
|
|
Rezyapova L.R., Valiev R.R., Usmanov E.I., Valiev R.Z.
|
| No 3 (2021) |
Obtaining graphene structures and nanopolymers using ultrasonic vibrations |
(Rus)
|
|
Rubanik V.V., Savitsky V.O., Rubanik jr. V.V., Lutsko V.F., Nikiforova I.V., Bui H., Doan D.
|
| No 3 (2021) |
Effect of γ′-phase particles on the mechanical behavior and deformation mechanism of (CoCrFeNi)94Ti2Al4 high entropy alloy single crystals |
(Rus)
|
|
Saraeva A.A.
|
| No 2 (2021) |
Innovative approach to the development of manufacturing procedures of producing goods in a multiproduct manufacture |
(Rus)
|
|
Reshetnikova E.P., Bochkarev P.Y.
|
| No 2 (2021) |
The application of acoustic emission method for ultrasonic fatigue testing monitoring |
(Rus)
|
|
Seleznev M.N., Vinogradov A.Y.
|
| No 2 (2021) |
Effective power of a constricted welding arc with heteropolar current pulses |
(Rus)
|
|
Sidorov V.P., Sovetkin D.E.
|
| No 2 (2021) |
The influence of rolling and high-pressure torsion in the Bridgman chamber on the quantitative characteristics of shear bands in an amorphous Zr-based alloy |
(Rus)
|
|
Khriplivets I.A.
|
| No 2 (2021) |
Microstructure and strength of joints of nickel sheets produced by ultrasonic welding |
(Rus)
|
|
Shayakhmetova E.R., Murzinova M.A., Nazarov A.A.
|
| No 2 (2021) |
The research of the processes of formation of porous non-ferrous metals |
(Rus)
|
|
Kovtunov A.I., Semistenov D.A., Khokhlov Y.Y., Myamin S.V.
|
| No 2 (2021) |
In-situ study of the corrosion process of biodegradable magnesium alloys |
(Rus)
|
|
Myagkikh P.N., Merson E.D., Poluyanov V.A., Merson D.L.
|
| No 2 (2021) |
Special aspects of strain localization during thermal power processing |
(Rus)
|
|
Rastorguev D.A., Semenov K.O.
|
| No 1 (2021) |
Regulation of powder particles shape and size at plasma spraying |
(Rus)
|
|
Ermakov S.B.
|
| No 1 (2021) |
Structural phase transformations during deformation Of Fe-Co-V alloys using the high-pressure torsion method |
(Rus)
|
|
Muradimova L.F., Glezer A.M., Shirshikov S.O., Shchetinin I.V., Dyakonov D.L.
|
| No 1 (2021) |
Estimation of texture parameters for the precision surfaces using the quasioptimal correlation algorithms |
(Rus)
|
|
Nоsоv N.V., Kоstin N.A., Ladyagin R.V.
|
| No 1 (2021) |
Development of turning process digital twin based on machine learning |
(Rus)
|
|
Rastorguev D.A., Sevastyanov A.A.
|
| No 1 (2021) |
Use of digital twins for mathematical modeling of ultrasonic drilling of titanium blanks |
(Rus)
|
|
Savelyev K.S., Ilyushkin M.V., Kiselev E.S.
|
| No 1 (2021) |
The enhancement of cutting capacity of a grinding wheel when processing ductile steel blank parts by ultrasonic activation |
(Rus)
|
|
Khazov A.V., Unyanin A.N.
|
| No 1 (2021) |
The comparative analysis of thermal effects in elastomers modified with MCNT at constant DC voltage |
(Rus)
|
|
Shchegolkov A.V.
|
| No 3 (2018) |
THE DEVELOPMENT AND APPLICATION OF THE PROCESS OF PRELIMINARY FORMATION OF THE HIGH-HOMOGENEOUS DRY MIXTURE “ALUMINUM POWDER - SINGLE-WALL CNT” IN THE TECHNOLOGY OF PRODUCTION OF THE ALUMINIUM MATRIX COMPOSITES |
(Rus)
|
|
Vetkasov N.I., Kapustin A.I., Sapunov V.V.
|
| No 3 (2018) |
THE STUDY OF INFLUENCE OF THE PARAMETERS OF MASS CENTER TRAJECTORY OF A JUMPING ROBOT ON ITS ACCELERATION MODES |
(Rus)
|
|
Vorochaeva L.Y., Savin S.I.
|
| No 3 (2018) |
PILOT TESTS OF OIL-WELL TUBING |
(Rus)
|
|
Vyboishchik M.A., Knyazkin S.A.
|
| No 3 (2018) |
COMPUTATIONAL SIMULATION OF THE PROCESS OF INSOLES DEFORMATION DURING THE USE |
(Rus)
|
|
Nosov N.V., Zyabochkina A.P.
|
| No 3 (2018) |
THE INFLUENCE OF HEATING TEMPERATURE FOR FORGING ON THE CRACKING TENDENCY OF A Cu-Mn-Al-Fe-Ni 59-3.5-2.5-0.5-0.4 WORKPIECE |
(Rus)
|
|
Svyatkin A.V.
|
| No 3 (2018) |
THE QUALITATIVE ANALYSIS OF SPECIAL ASPECTS OF WEAR AND DESTRUCTION OF TOOLS DURING THE ULTRASONIC BURNISHING OF THE MACHINE PARTS |
(Rus)
|
|
Selivanov A.S., Balakhnina A.A., Soroka I.V.
|
| No 3 (2018) |
THE RESEARCH OF A TEMPERATURE FIELD WHEN TURNING WITH VIBRATIONS SUPERPOSITION |
(Rus)
|
|
Unyanin A.N., Finageev P.R.
|
| No 1 (2019) |
THE DEVELOPMENT AND APPLICATION OF THE TECHNIQUE OF CALCULATION OF THERMAL BREAKDOWN VOLTAGE IN THE HIGH-FREQUENCY STRUCTURES |
(Rus)
|
|
Volokobinsky E.M.
|
| No 1 (2019) |
SCIENTIFIC BASIS OF DEVELOPMENT AND THE METHODOLOGY OF CREATION OF STEELS FOR THE PRODUCTION OF OILFIELD CASING AND TUBULAR GOODS WITH THE INCREASED STRENGTH AND CORROSION RESISTANCE |
(Rus)
|
|
Vyboishchik M.A., Ioffe A.V.
|
| No 1 (2019) |
TO THE ISSUES OF TECHNOLOGICAL PREPARATION AND PROCESSING OF NON-RIGID WORKPIECES MACHINE PARTS |
(Rus)
|
|
Kiselev E.S., Nazarov M.V., Mezin N.V.
|
| No 1 (2019) |
THE KINETICS AND MECHANISM OF THE FATIGUE FRACTURE OF SAMPLES OF 40H AND 38H2N2MA STEELS |
(Rus)
|
|
Klevtsov G.V., Merson D.L., Klevtsova N.A., Merson E.D., Linderov M.L., Zasypkin S.V., Bondarenko A.V.
|
| No 1 (2019) |
THE INFLUENCE OF NICKEL ON THE PROPERTIES OF THE DEPOSITED ALLOYS OF TITANIUM-ALUMINUM SYSTEM |
(Rus)
|
|
Kovtunov A.I., Bochkarev A.G., Plakhotny D.I., Gushchin A.A.
|
| No 1 (2019) |
KEY ASPECTS OF INFLUENCE OF ULTRASONIC VIBRATIONS OF A DRESSING TOOL ON THE EFFICIENCY OF THE PROCESS OF WHEEL DRESSING |
(Rus)
|
|
Murashkin S.V., Selivanov A.S., Malyshev V.I.
|
| No 1 (2019) |
DETERMINATION OF LOADS FOR STRENGTH CALCULATIONS OF THE ATTACHMENT FITTINGS OF THE DEVICES AND ASSEMBLIES OF A SPACECRAFT IN A POWERED FLIGHT |
(Rus)
|
|
Popkov A.A., Filatov V.A., Filipov A.G.
|
| No 1 (2019) |
THE FORMATION OF PROJECT PROCEDURES RANKING TECHNIQUE IN THE SYSTEM OF PLANNING OF MULTIPRODUCT ENGINEERING PROCESSES |
(Rus)
|
|
Razmanov I.A., Mitin S.G., Bochkaryov P.Y.
|
| No 1 (2019) |
THE STUDY OF SPECIAL ASPECTS OF COMBUSTION IN A VARIABLE VOLUME COMBUSTION CHAMBER |
(Rus)
|
|
Shaikin A.P., Ivashin P.V., Galiev I.R., Bobrovsky I.N., Deryachev A.D., Tverdokhlebov A.Y.
|
| No 3 (2018) |
THE INFLUENCE OF THE ADDITION OF SiO2 NANO-DIMENSIONAL PARTICLES TO THE ELECTROLYTE ON THE COMPOSITION AND PROPERTIES OF THE OXIDE LAYERS FORMED BY THE PLASMA-ELECTROLYTIC OXIDATION ON MAGNESIUM |
(Rus)
|
|
Borgardt E.D., Polunin A.V., Ivashin P.V., Krishtal M.M.
|
| No 4 (2020) |
THE MORPHOLOGY AND MICROHARDNESS OF THE SURFACE OF AK5M2 ALLOY IRRADIATED BY AN ELECTRON BEAM |
(Rus)
|
|
Zagulyaev D.V., Abaturova A.A., Aksenova K.V., Leonov A.A., Yakupov D.F.
|
| No 4 (2020) |
IMPROVING MATHEMATICAL, METHODOLOGICAL, AND ALGORITHMIC SUPPORT OF IMPLEMENTATION OF AN ENLARGED BLOCK OF DESIGN PROCEDURES FOR THE ANALYSIS OF REQUIREMENTS TO THE HIGHLY PRECISE PRODUCTS ASSEMBLY |
(Rus)
|
|
Nazaryev A.V., Bochkarev P.Y.
|
| No 4 (2020) |
CHANGING THE STRUCTURE AND PROPERTIES OF HOT-DIP ZINC COATINGS USING DIFFUSION ANNEALING |
(Rus)
|
|
Rodina A.A., Dobychina K.E., Bondareva O.S.
|
| No 4 (2020) |
EFFECTIVE POWER OF THE REVERSE POLARITY WELDING ARC WHEN SURFACING ALUMINUM WITH A CONSUMABLE ELECTRODE |
(Rus)
|
|
Sidorov V.P., Kovtunov A.I., Bochkarev A.G., Sovetkin D.E.
|
| No 4 (2020) |
THE STUDY OF THE INFLUENCE OF ZNCL2 CONTENT IN A FLUX FOR BRAZING OF AL-MG ALLOYS ON ITS TECHNOLOGICAL PROPERTIES |
(Rus)
|
|
Stepanov M.A.
|
| No 4 (2020) |
THE TECHNOLOGIES OF IMPROVING THE PROCESS OF AIR-FUEL MIXTURE COMBUSTION IN SPARK IGNITION ENGINES |
(Rus)
|
|
Shaikin A.P., Galiev I.R., Pavlov D.A., Sazonov M.V.
|
| No 4 (2020) |
THE RESEARCH OF INTERACTION OF ZINC SOLDERS WITH ALUMINUM ALLOYS DURING FRICTION APPLICATION |
(Rus)
|
|
Shargaev E.O., Pashkov I.N.
|
| No 4 (2020) |
THE RELATIONSHIP BETWEEN THE ANOMALIES OF THE PROPERTIES OF ALLOYS WITH A SEMICONDUCTOR COMPONENT AND SPECIAL FEATURES OF GLASS FORMATION AND STATE DIAGRAMS |
(Rus)
|
|
Shakhnazarov K.Y., Mikhailov A.V., Tzykanov D.V.
|
| No 3 (2020) |
THE ASSESSMENT OF THE EFFICIENCY OF CARBONITRIDING PROCESS APPLICATION FOR HARDENING OF THE THREADED JOINTS OF DRILL PIPES MADE OF FOREIGN BLANK PARTS |
(Rus)
|
|
Stepanchukova A.V., Priymak E.Y.
|
| No 3 (2020) |
CONCERNING THE INFLUENCE OF DEFORMATION RATE ON THE MECHANICAL BEHAVIOR OF THE TI-3.5AL-1.1ZR-2.5V TITANIUM ALLOY UNDER TENSION |
(Rus)
|
|
Tolmachev T.P., Zaytsev D.V., Yakupov R.R., Panfilov G.P., Panfilov P.E.
|
| No 3 (2020) |
DETERMINATION OF INFLUENCE OF ANTI-FRICTION COMPONENTS ON THE TRIBOLOGICAL PROPERTIES OF THREAD COATINGS |
(Rus)
|
|
Churikova T.N., Samkova N.P., Savray R.A.
|
| No 3 (2020) |
THE REGULARITIES OF THE RELATIONSHIP BETWEEN THE ANOMALIES OF PHYSICOMECHANICAL PROPERTIES OF NONFERROUS ALLOYS AND PHASE EQUILIBRIUM DIAGRAMS |
(Rus)
|
|
Shakhnazarov K.Y.
|
| No 3 (2020) |
THE INFLUENCE OF CARBON NANOTUBES ON THE ELECTRIC CONDUCTIVITY OF THERMOSETTING PLASTICS AND ELASTOMERS |
(Rus)
|
|
Shchegolkov A.V., Komarov F.F., Parfimovich I.D., Milchanin O.V., Shchegolkov A.V., Khrobak A.V., Semenkova A.V.
|
| No 3 (2020) |
STRESS-CORROSION FRACTURE OF ELECTRIC-WELDED PIPES IN THE HIGH-AGGRESSIVENESS OILFIELD MEDIUMS |
(Rus)
|
|
Vyboyshchik M.A., Kudashov D.V., Knyazkin S.A., Fedotova A.V., Kazadaev D.S.
|
| No 3 (2020) |
ELECTRICALLY CONDUCTIVE COMPOSITES BASED ON EPOXY RESIN MODIFIED WITH GRAPHENE |
(Rus)
|
|
Gerasimova A.V., Memetov N.R., Tkachev A.G., Yagubov V.S.
|
| No 2 (2020) |
THE EFFECT OF PLASTIC DEFORMATION TEMPERATURE ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF EK-164 AUSTENITIC STEEL |
(Rus)
|
|
Akkuzin S.A., Litovchenko I.Y.
|
| No 2 (2020) |
THE INFLUENCE OF THERMOMECHANICAL TREATMENT ON SPECIAL FEATURES OF THE DEFORMED MICROSTRUCTURE OF THE EK-181 FERRITIC-MARTENSITIC STEEL |
(Rus)
|
|
Almaeva K.V., Litovchenko I.Y., Polekhina N.A.
|
| No 2 (2020) |
THE INFLUENCE OF TIME OF HOLDING IN A MELT ON THE MORPHOLOGY OF ZINC COATING ON STEELS WITH VARIOUS SILICON CONTENT |
(Rus)
|
|
Golovach A.M., Dmitrieva M.O., Bondareva O.S., Melnikov A.A.
|
| No 2 (2020) |
CALCULATION-THEORETICAL STUDY OF CHARACTERISTICS OF THE TWO-PHASE FLOW IN A SANDBLASTING MACHINE |
(Rus)
|
|
Gorelov N.D., Popov V.V., Bernikov V.V.
|
| No 2 (2020) |
EFFECT OF THE PRECIPITATION HARDENING ON REGULARITIES OF PLASTIC DEFORMATION AND FRACTURE MODE OF V-ALLOYED HIGH NITROGEN AUSTENITIC STEEL |
(Rus)
|
|
Mikhno A.S., Panchenko M.Y., Maier G.G., Moskvina V.A., Melnikov E.V., Astafurov S.V., Astafurova E.G.
|
| No 2 (2020) |
INVESTIGATION OF AISI 316 STAINLESS STEEL CORROSION IN PERCHLORIC ACID |
(Rus)
|
|
Ostapenko G.I., Usmanov I.R.
|
| No 2 (2020) |
THE ANALYSIS OF DOUBLE-ACTION PRESS SLIDER MOVEMENT |
(Rus)
|
|
Pocheckuev E.N., Puteev P.A.
|
| No 2 (2020) |
CALCULATION OF STRESSES IN A SPHERICAL SHELL WITH INTERNAL SURFACE DEFECTS |
(Rus)
|
|
Sedova O.S.
|
| No 2 (2020) |
THE INFLUENCE OF AGE HARDENING ON MICROSTRUCTURE, PHASE COMPOSITION, AND MICROHARDNESS OF HIGH-NITROGEN AUSTENITIC STEEL |
(Rus)
|
|
Tumbusova I.A., Maier G.G., Panchenko M.Y., Moskvina V.A., Melnikov E.V., Astafurov S.V., Astafurova E.G.
|
| No 2 (2020) |
BAIN’S DEFORMATION MATRIX FOR MARTENSITIC TRANSITION Β1↔Β1′ IN CUALNI ALLOY AND THE CRYSTALLOGRAPHIC RESOURCE OF TRANSFORMATION |
(Rus)
|
|
Chernysheva T.Y., Evard M.E.
|
| No 1 (2020) |
THE INVESTIGATION OF STRENGTH AND PLASTICITY CHARACTERISTICS OF COMPOSITE LAYERS IN AUSTENITIC STAINLESS STEEL SUBJECTED TO ION-PLASMA TREATMENT USING THE NANOINDENTATION METHOD |
(Rus)
|
|
Zagibalova E.A., Moskvina V.A., Astafurov S.V., Maier G.G., Melnikov E.V., Panchenko M.Y., Ramazanov K.N., Astafurova E.G.
|
| No 1 (2020) |
SIMULATION OF ALTERNATING DEFORMATION OF THE TINI ALLOY SAMPLE IN ISOTHERMAL AND ADIABATIC REGIMES |
(Rus)
|
|
Lapina T.A., Belyaev F.S., Evard M.E.
|
| No 1 (2020) |
ON THE HYDROGEN STATE IN MAGNESIUM ALLOYS AFTER CORROSIVE EFFECT |
(Rus)
|
|
Myagkikh P.N., Merson E.D., Poluyanov V.A., Merson D.L., Vinogradov A.Y.
|
| No 1 (2020) |
THE EFFECT OF HYDROGEN CHARGING ON THE MECHANICAL PROPERTIES AND FRACTURE MECHANISMS OF HIGH-NITROGEN CHROMIUM-MANGANESE STEELS AFTER AGE-HARDENING |
(Rus)
|
|
Panchenko M.Y., Mikhno A.S., Tumbusova I.A., Maier G.G., Moskvina V.A., Melnikov E.V., Astafurov S.V., Astafurova E.G.
|
| No 1 (2020) |
THE INFLUENCE OF CHROMIUM CARBIDE ADDITIVE ON THE STRUCTURE AND ABRASIVE WEAR RESISTANCE OF THE NICRBSI COATING FORMED BY LASER CLADDING |
(Rus)
|
|
Soboleva N.N., Nikolaeva E.P., Makarov A.V., Malygina I.Y.
|
| No 1 (2020) |
THE EFFECT OF MEGAPLASTIC DEFORMATION IN THE BRIDGMAN CHAMBER ON THE PHASE TRANSFORMATIONS, CORROSION BEHAVIOR, AND MICROHARDNESS OF PURE VT1-00 AND VT1-0 TITANIUM |
(Rus)
|
|
Cheretaeva A.O., Shurygina N.A., Glezer A.M.
|
| No 1 (2020) |
ON THE MECHANOCHEMICAL CORROSION OF A PIPE WITH A THICKNESS DEVIATION UNDER THE ACTION OF EXTERNAL AND INTERNAL PRESSURE |
(Rus)
|
|
Zhao S.
|
| No 1 (2020) |
TWO APPROACHES TO STUDY THE EFFECT OF SURFACE STRESSES IN AN ELASTIC BODY WITH A NEARLY CIRCULAR NANODEFECT |
(Rus)
|
|
Vakaeva A.B., Shuvalov G.M., Kostyrko S.A., Sedova O.S.
|
| No 1 (2020) |
THE INFLUENCE OF SR(CA)2NB2O7 ON THE PHASE FORMATION AND THE STRUCTURE OF SOLID SOLUTIONS BASED ON THE SODIUM-KALIUM NIOBATE |
(Rus)
|
|
Glazunova E.V.
|
| No 1 (2020) |
THE STUDY OF THE STRUCTURE AND PROPERTIES OF SPECIMENS OF INCONEL 738 HEAT-RESISTING ALLOY OBTAINED BY THE SELECTIVE LASER MELTING TECHNIQUE (SLM) |
(Rus)
|
|
Dmitrieva M.O., Melnikov A.A., Golovach A.M., Bondareva O.S., Smelov V.G., Sotov A.V., Agapovichev A.V.
|
| No 4 (2018) |
MODIFICATION OF CEMENT BY FEW-LAYER GRAPHENE |
(Rus)
|
|
Al-Shiblavi K.A., Pershin V.F., Pasko T.V.
|
| No 4 (2018) |
THE PECULIARITIES OF BRITTLE-PLASTIC TRANSITION IN THE FERROUS POWDERED MATERIALS |
(Rus)
|
|
Egorova R.V., Egorov M.S.
|
| No 4 (2018) |
THE RESEARCH OF POLYPROPYLENE FABRICS WITH VOLATILE CORROSION INHIBITOR FOR PACKAGING OF ZINC-COATED PRODUCTS |
(Rus)
|
|
Ponomarev A.P., Medyanik N.L., Tarasyuk E.V., Kolyada L.G.
|
| No 4 (2018) |
THE STUDY OF HARD TURNING OF 105WCr6 STEEL |
(Rus)
|
|
Rastorguev D.A., Sevastiyanov A.A.
|
| No 4 (2018) |
TECHNICAL SOLUTIONS FOR BURNING OF THE DEPRESSED IONIZED GAS FUEL IN THE ELECTRIC FIELD |
(Rus)
|
|
Romanchikov, S.A.
|
| No 4 (2018) |
THE CALCULATION-EXPERIMENTAL DETERMINATION OF PENETRATION OF A SPOT WELDED BY A FIXED ARC |
(Rus)
|
|
Sidorov V.P., Melzitdinova A.V.
|
| No 2 (2018) |
THE INFLUENCE OF THE ELECTROSTATIC FIELD ON THE LASER THERMO-PROCESSING OF METALS |
(Rus)
|
|
Bashmakov D.A., Turichin G.A.
|
| No 2 (2018) |
THE COMPARISON OF THE EXPERIMENTAL DATA AND THE EDUCATED ESTIMATES OF STRENGTH AND ELECTRICAL PROPERTIES OF Cu/Mg COMPOSITES WITH VARIOUS PROPORTIONS OF THE COMPONENTS |
(Rus)
|
|
Volkov A.Y., Kalonov A.A.
|
| No 2 (2018) |
THE DESTRUCTIVE THERMOELASTIC STRESSES CAUSED BY HEAT OUTPUT IN GAZ INCLUSIONS IN COMPOSITE MATERIALS |
(Rus)
|
|
Volokobinsky E.M.
|
| No 2 (2018) |
THE STUDY OF THERMAL CHARACTERISTICS OF GLASS-, CARBON FIBER MATERIALS AND MATERIALS PRODUCED BASING ON THE ADDITIVE TECHNOLOGIES USING 3DP AND FDM TECHNOLOGIES |
(Rus)
|
|
Zlobina I.V., Bekrenev N.V., Pavlov S.P.
|
| No 2 (2018) |
POROSITY DURING THE REPAIR WORK OF TANKS AND PIPELINES FOR TRANSPORTATION OF OIL AND OIL PRODUCTS AND THE MEASURES FOR ITS PREVENTION |
(Rus)
|
|
Kovtunov A.I., Pudovkina N.G., Pudovkin A.A., Maslyaev A.M.
|
| No 2 (2018) |
THE PRODUCTIVE STRATUM COMPLETION USING THE ELECTROHYDRAULIC DRILLING PERFORATOR WITH THE STINGER ROTATING MECHANISM |
(Rus)
|
|
Mesropyan A.V., Rakhmatullina M.R.
|
| No 2 (2018) |
THE STUDY OF KINEMATICS OF INTERACTION OF A GRINDING WHELL WITH A WORKPIECE WHEN APPLYING ULTRASONIC VIBRATIONS |
(Rus)
|
|
Unyanin A.N., Khazov A.V.
|
| No 2 (2018) |
SPECIAL CHARACTERISTICS OF THE DEFORMING MECHANISM DURING STAMPING SHEARING OPERATIONS |
(Rus)
|
|
Shenberger P.N.
|
| No 2-2 (2015) |
DEVELOPMENT AND COMMERCIAL IMPLEMENTATION OF HIGH PERFORMANCE MANUFACTURING AND ENVIRONMENTALLY APPROPRIATE TECHNOLOGY OF SURFACE PLASTIC DEFORMATION OF CARS PARTS |
(Rus)
|
|
Bobrovskiy N.M., Melnikov P.A., Bobrovskiy I.N., Levitskih O.O.
|
| 101 - 200 of 255 Items |
<< < 1 2 3 > >>
|
