Search

Issue
Title
Authors
Digital measurements of non-metallic inclusions in steel
Stukalova N.A., Kodirov D.F., Alekseev V.I., Sokolovskaya E.A., Rodionova I.G.
The study of end milling temperature of low-alloy steel in coarse-grained and ultrafine-grained states
Rastorguev D.A., Sevastyanov A.A., Klevtsov G.V.
The influence of 3D printing mode on the chemical composition and structure of 30HGSA steel
Kabaldin Y.G., Anosov M.S., Mordovina Y.S., Chernigin M.A.
Acoustic properties of 15-5 PH maraging steel after energy deposition
Muravieva O.V., Muraviev V.V., Volkova L.V., Vladykin A.L., Belosludtsev K.Y.
The study of transformations of supercooled austenite during step quenching of 20Cr2Mn2SiNiMo steel
Maisuradze M.V., Kuklina A.A., Nazarova V.V.
Low-cycle fatigue of 10 % Cr steel with high boron content at room temperature
Brazhnikov I.S., Fedoseeva A.E.
Fatigue strength of 30ХГСА–40ХМФА welded joints produced by rotary friction welding
Priymak E.Y., Kuzmina E.A., Gladkovskii S.V., Vichuzhanin D.I., Veselova V.E.
THE INVESTIGATION OF STRENGTH AND PLASTICITY CHARACTERISTICS OF COMPOSITE LAYERS IN AUSTENITIC STAINLESS STEEL SUBJECTED TO ION-PLASMA TREATMENT USING THE NANOINDENTATION METHOD
Zagibalova E.A., Moskvina V.A., Astafurov S.V., Maier G.G., Melnikov E.V., Panchenko M.Y., Ramazanov K.N., Astafurova E.G.
The enhancement of cutting capacity of a grinding wheel when processing ductile steel blank parts by ultrasonic activation
Khazov A.V., Unyanin A.N.
INFLUENCE OF FORGING FORCE ON THE FORMATION OF THE STRUCTURE AND MECHANICAL PROPERTIES OF MEDIUM-CARBON STEELS WELDED JOINTS IN ROTARY FRICTION WELDING
Kuzmina E.A., Priymak E.Y.
SPECIAL ASPECTS OF HEAT TREATMENT OF STEELS FOR THE PRODUCTION OF HOT DEFORMATION STAMPS
Krylova S.E., Romashkov E.V., Pilipchuk G.P.
THE INFLUENCE OF THERMOMECHANICAL TREATMENT ON SPECIAL FEATURES OF THE DEFORMED MICROSTRUCTURE OF THE EK-181 FERRITIC-MARTENSITIC STEEL
Almaeva K.V., Litovchenko I.Y., Polekhina N.A.
THE KINETICS AND MECHANISM OF THE FATIGUE FRACTURE OF SAMPLES OF 40H AND 38H2N2MA STEELS
Klevtsov G.V., Merson D.L., Klevtsova N.A., Merson E.D., Linderov M.L., Zasypkin S.V., Bondarenko A.V.
THE EFFECT OF PLASTIC DEFORMATION TEMPERATURE ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF EK-164 AUSTENITIC STEEL
Akkuzin S.A., Litovchenko I.Y.
Concerning the selection of areas with a dominant type of dependence when analyzing production control data
Timoshenko V.V., Budanova E.S., Kodirov D.F., Sokolovskaya E.A., Kudrya A.V.
THE INFLUENCE OF THERMAL CYCLIC TREATMENT ON THE SERVICE DURABILITY OF WELDED ELEMENTS WITH SOFT INTERLAYER
Dinmukhametova L.S., Poyarkova E.V.
THE INFLUENCE OF TEMPERATURE OF NANOSTRUCTURING FRICTIONAL TREATMENT ON THE STRUCTURAL-PHASE STATE, HARDENING AND SURFACE QUALITY OF AUSTENITIC CHROMIUM-NICKEL STEEL
Skorynina P.A., Makarov A.V., Yurovskikh A.S., Osintseva A.L.
Specific features of structural-phase transformations and hardening during shear deformation under pressure of high-nitrogen steel with austenitic-ferritic structure of metal matrix
Luchko S.N., Makarov A.V., Volkova E.G.
SCIENTIFIC BASIS OF DEVELOPMENT AND THE METHODOLOGY OF CREATION OF STEELS FOR THE PRODUCTION OF OILFIELD CASING AND TUBULAR GOODS WITH THE INCREASED STRENGTH AND CORROSION RESISTANCE
Vyboishchik M.A., Ioffe A.V.
THE INFLUENCE OF LOW-TEMPERATURE PLASMA MODIFICATION WITH CARBON AND NITROGEN ON THE HARDENING AND SURFACE ROUGHNESS OF AUSTENITIC STAINLESS STEEL
Skorynina P.A., Makarov A.V., Menshakov A.I., Osintseva A.L., Chalina M.A.
Irregularity of microhardness and microstructure of low-carbon steel rolled in a two-stand rolling-leveling mill
Ivanov V.P., Pilipenko S.V., Shtempel O.P., Vigerina T.V.
THE ANALYSIS OF THE STRUCTURE OF ELECTROEXPLOSIVE COATINGS OF THE TiC-Ni SYSTEM ON THE DIE STEEL AFTER THE ELECTRON-BEAM TREATMENT
Romanov D.A., Protopopov E.V., Bataev V.A., Kuziv E.M., Gromov V.E., Ivanov Y.F.
THE INFLUENCE OF INTENSIVE PLASTIC DEFORMATION ON THE STRUCTURE AND PHYSICAL AND MECHANICAL PROPERTIES OF HIGH-CARBON STEEL
Goruleva L.S., Gorkunov E.S., Zadvorkin S.M., Makarov A.V.
The influence of method and temperature of ion-plasma treatment on physical and mechanical properties of surface layers in austenitic stainless steel
Zagibalova E.A., Moskvina V.A., Mayer G.G.
THE EFFECT OF HYDROGEN CHARGING ON THE MECHANICAL PROPERTIES AND FRACTURE MECHANISMS OF HIGH-NITROGEN CHROMIUM-MANGANESE STEELS AFTER AGE-HARDENING
Panchenko M.Y., Mikhno A.S., Tumbusova I.A., Maier G.G., Moskvina V.A., Melnikov E.V., Astafurov S.V., Astafurova E.G.
IDENTIFICATION OF FATIGUE CRACK ZONES IN VERY HIGH CYCLE FATIGUED 42CrMo4 STEEL WITH THE USE OF QUANTITATIVE FRACTOGRAPHY
Seleznev M.N., Merson E.D.
THE INFLUENCE OF HYDROGEN-CHARGING REGIME ON THE STRAIN HARDENING AND FRACTURE MECHANISM OF HIGH-NITROGEN STEEL
Moskvina V.A., Astafurova E.G., Mayer G.G., Melnikov E.V., Galchenko N.K.
THE INFLUENCE OF HYDROGEN CHARGING ON THE MECHANICAL PROPERTIES AND FRACTURE MODE OF Cr17Ni13Mo3 AUSTENITIC STAINLESS STEEL
Fortuna A.S., Moskvina V.A., Mayer G.G., Melnikov E.V., Astafurova E.G.
Characteristics of a gradient material based on Ni-Cr stainless steel and H20N80 alloy produced by electron-beam 3D-printing
Moskvina V.A., Melnikov E.V., Zagibalova E.A.
THE INFLUENCE OF STRAIN-INDUCED DEFECTS ON PHASE AND ELEMENTAL COMPOSITION OF HARDENED SURFACE LAYERS OF AUSTENITIC STAINLESS STEEL FORMED DURING ION-PLASMA TREATMENT
Moskvina V.A., Astafurova E.G., Ramazanov K.N., Maier G.G., Astafurov S.V., Panchenko M.Y., Melnikov E.V., Zagibalova E.A.
Characteristic properties of the microstructure and microtexture of medium-carbon steel subjected to sulfide stress cracking
Malinin A.V., Sitdikov V.V., Tkacheva V.E., Makatrov A.K., Valekzhanin I.V., Markin A.N.
MECHANICAL BEHAVIOR OF 04H20N6G11M2AFB NITROGEN AUSTENIC STEEL DURING STATIC TENSION WITHIN THE TEMPERATURE INTERVAL FROM −70 TO +140 ºС
Savray R.A., Makarov A.V., Gorkunov E.S., Pecherkina N.L., Rogovaya S.A., Osintseva A.L., Kalinin G.Y., Mushnikova S.Y.
THE STRUCTURE AND PROPERTIES OF SURFACING SURFACE IRRADIATED BY THE INTENSIVE LOW-ENERGY PULSED ELECTRON BEAM
Rubannikova Y.A., Gromov V.E., Kosinov D.A., Kormyshev V.E.
THE INFLUENCE OF AGE HARDENING ON MICROSTRUCTURE, PHASE COMPOSITION, AND MICROHARDNESS OF HIGH-NITROGEN AUSTENITIC STEEL
Tumbusova I.A., Maier G.G., Panchenko M.Y., Moskvina V.A., Melnikov E.V., Astafurov S.V., Astafurova E.G.
Thermal stability of the ЭИ-961Ш steel structure after combined processing
Frik A.A., Nikitina M.A., Islamgaliev R.K.
INTRODUCTION OF TECHNOLOGY OF ELECTROLYTIC-PLASMA POLISHING OF METAL GOODS
Volenko A.P., Boychenko O.V., Chirkunova N.V.
THE INFLUENCE OF PRELIMINARY DEFORMATION TREATMENT ON THE HARDENING AND QUALITY OF THE NITRIDED SURFACE OF AUSTENITE STAINLESS STEEL
Makarov A.V., Samoylova G.V., Mamaev A.S., Osintseva A.L., Savray R.A.
Regulation of powder particles shape and size at plasma spraying
Ermakov S.B.
INVESTIGATION OF AISI 316 STAINLESS STEEL CORROSION IN PERCHLORIC ACID
Ostapenko G.I., Usmanov I.R.
WELDING DEFORMATIONS, «SLACK TEMPERATURES» METHOD AND THE STRENGTHENING OF FIXED COLUMNS OF ROOF STEEL TRUSSES
Rodionov I.K., Rodionov I.I.
NANOSTRUCTURING COMBINED FRICTIONAL-THERMAL TREATMENT OF 12KH18N10T AUSTENIC STEEL
Makarov A.V., Skorynina P.A., Volkova E.G., Osintseva A.L.
THE STRUCTURE, PHASE COMPOSITION AND MICROMECHANICAL CHARACTERISTICS OF HIGH-NITROGEN AUSTENITIC STEEL AFTER HIGH-TEMPERATURE AGEING AND DEFORMATION BY SHEAR UNDER PRESSURE
Makarov A.V., Luchko S.N., Volkova E.G., Osintseva A.L., Litvinov A.V.
THE STUDY OF HARD TURNING OF 105WCr6 STEEL
Rastorguev D.A., Sevastiyanov A.A.
EFFECT OF THE PRECIPITATION HARDENING ON REGULARITIES OF PLASTIC DEFORMATION AND FRACTURE MODE OF V-ALLOYED HIGH NITROGEN AUSTENITIC STEEL
Mikhno A.S., Panchenko M.Y., Maier G.G., Moskvina V.A., Melnikov E.V., Astafurov S.V., Astafurova E.G.
THE DYNAMIC MODEL OF AN ARC FURNACE IN MATLAB (SIMULINK)
Chernenko A.N., Vakhnina V.V., Martynova S.G.
The influence of aging on phase composition and mechanical properties of vanadium-alloyed high-nitrogen steel
Tumbusova I.A., Maier G.G.
THE FORMATION OF NANOCRYSTALLINE MARTENSITE ON A WORKING SURFACE OF TOOL STEEL IN THE CASE OF ABRASIVE WEAR
Nikiforova S.M., Filippov M.A., Ozerets N.N.
The influence of frictional treatment and liquid carburizing on general corrosion resistance of chromium-nickel austenitic steels
Skorynina P.A., Makarov A.V., Savrai R.A.
ABOUT THE EXPERIMENTAL RESEARCH OF STEEL TRUSS STRENGTHENED UNDER THE LOAD WITH THE USE OF WELDING
Rodionov I.K.
INHIBITING PROPERTIES OF CONJUGATED UNSATURATED KETONES IN THE ACIDIC MEDIUM
Glukhov P.A., Kalinnikov N.A.
Effect of nanostructuring frictional treatment on micromechanical and corrosion properties of stable austenitic chromium-nickel steel
Skorynina P.A., Makarov A.V., Berezovskaya V.V., Merkushkin E.A., Chekan N.M.
1 - 51 of 51 Items

Search tips:

  • Search terms are case-insensitive
  • Common words are ignored
  • By default only articles containing all terms in the query are returned (i.e., AND is implied)
  • Combine multiple words with OR to find articles containing either term; e.g., education OR research
  • Use parentheses to create more complex queries; e.g., archive ((journal OR conference) NOT theses)
  • Search for an exact phrase by putting it in quotes; e.g., "open access publishing"
  • Exclude a word by prefixing it with - or NOT; e.g. online -politics or online NOT politics
  • Use * in a term as a wildcard to match any sequence of characters; e.g., soci* morality would match documents containing "sociological" or "societal"

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies