| Issue |
Title |
File |
| No 2 (2020) |
THE ANALYSIS OF DOUBLE-ACTION PRESS SLIDER MOVEMENT |
(Rus)
|
|
Pocheckuev E.N., Puteev P.A.
|
| No 2 (2020) |
CALCULATION OF STRESSES IN A SPHERICAL SHELL WITH INTERNAL SURFACE DEFECTS |
(Rus)
|
|
Sedova O.S.
|
| No 2 (2020) |
THE INFLUENCE OF AGE HARDENING ON MICROSTRUCTURE, PHASE COMPOSITION, AND MICROHARDNESS OF HIGH-NITROGEN AUSTENITIC STEEL |
(Rus)
|
|
Tumbusova I.A., Maier G.G., Panchenko M.Y., Moskvina V.A., Melnikov E.V., Astafurov S.V., Astafurova E.G.
|
| No 2 (2020) |
BAIN’S DEFORMATION MATRIX FOR MARTENSITIC TRANSITION Β1↔Β1′ IN CUALNI ALLOY AND THE CRYSTALLOGRAPHIC RESOURCE OF TRANSFORMATION |
(Rus)
|
|
Chernysheva T.Y., Evard M.E.
|
| No 1 (2020) |
THE INVESTIGATION OF STRENGTH AND PLASTICITY CHARACTERISTICS OF COMPOSITE LAYERS IN AUSTENITIC STAINLESS STEEL SUBJECTED TO ION-PLASMA TREATMENT USING THE NANOINDENTATION METHOD |
(Rus)
|
|
Zagibalova E.A., Moskvina V.A., Astafurov S.V., Maier G.G., Melnikov E.V., Panchenko M.Y., Ramazanov K.N., Astafurova E.G.
|
| No 1 (2020) |
SIMULATION OF ALTERNATING DEFORMATION OF THE TINI ALLOY SAMPLE IN ISOTHERMAL AND ADIABATIC REGIMES |
(Rus)
|
|
Lapina T.A., Belyaev F.S., Evard M.E.
|
| No 1 (2020) |
ON THE HYDROGEN STATE IN MAGNESIUM ALLOYS AFTER CORROSIVE EFFECT |
(Rus)
|
|
Myagkikh P.N., Merson E.D., Poluyanov V.A., Merson D.L., Vinogradov A.Y.
|
| No 1 (2020) |
THE EFFECT OF HYDROGEN CHARGING ON THE MECHANICAL PROPERTIES AND FRACTURE MECHANISMS OF HIGH-NITROGEN CHROMIUM-MANGANESE STEELS AFTER AGE-HARDENING |
(Rus)
|
|
Panchenko M.Y., Mikhno A.S., Tumbusova I.A., Maier G.G., Moskvina V.A., Melnikov E.V., Astafurov S.V., Astafurova E.G.
|
| No 1 (2020) |
THE INFLUENCE OF CHROMIUM CARBIDE ADDITIVE ON THE STRUCTURE AND ABRASIVE WEAR RESISTANCE OF THE NICRBSI COATING FORMED BY LASER CLADDING |
(Rus)
|
|
Soboleva N.N., Nikolaeva E.P., Makarov A.V., Malygina I.Y.
|
| No 1 (2020) |
THE EFFECT OF MEGAPLASTIC DEFORMATION IN THE BRIDGMAN CHAMBER ON THE PHASE TRANSFORMATIONS, CORROSION BEHAVIOR, AND MICROHARDNESS OF PURE VT1-00 AND VT1-0 TITANIUM |
(Rus)
|
|
Cheretaeva A.O., Shurygina N.A., Glezer A.M.
|
| No 1 (2020) |
ON THE MECHANOCHEMICAL CORROSION OF A PIPE WITH A THICKNESS DEVIATION UNDER THE ACTION OF EXTERNAL AND INTERNAL PRESSURE |
(Rus)
|
|
Zhao S.
|
| No 1 (2020) |
TWO APPROACHES TO STUDY THE EFFECT OF SURFACE STRESSES IN AN ELASTIC BODY WITH A NEARLY CIRCULAR NANODEFECT |
(Rus)
|
|
Vakaeva A.B., Shuvalov G.M., Kostyrko S.A., Sedova O.S.
|
| No 1 (2020) |
THE INFLUENCE OF SR(CA)2NB2O7 ON THE PHASE FORMATION AND THE STRUCTURE OF SOLID SOLUTIONS BASED ON THE SODIUM-KALIUM NIOBATE |
(Rus)
|
|
Glazunova E.V.
|
| No 1 (2020) |
THE STUDY OF THE STRUCTURE AND PROPERTIES OF SPECIMENS OF INCONEL 738 HEAT-RESISTING ALLOY OBTAINED BY THE SELECTIVE LASER MELTING TECHNIQUE (SLM) |
(Rus)
|
|
Dmitrieva M.O., Melnikov A.A., Golovach A.M., Bondareva O.S., Smelov V.G., Sotov A.V., Agapovichev A.V.
|
| No 4 (2018) |
MODIFICATION OF CEMENT BY FEW-LAYER GRAPHENE |
(Rus)
|
|
Al-Shiblavi K.A., Pershin V.F., Pasko T.V.
|
| No 4 (2018) |
THE PECULIARITIES OF BRITTLE-PLASTIC TRANSITION IN THE FERROUS POWDERED MATERIALS |
(Rus)
|
|
Egorova R.V., Egorov M.S.
|
| No 4 (2018) |
THE RESEARCH OF POLYPROPYLENE FABRICS WITH VOLATILE CORROSION INHIBITOR FOR PACKAGING OF ZINC-COATED PRODUCTS |
(Rus)
|
|
Ponomarev A.P., Medyanik N.L., Tarasyuk E.V., Kolyada L.G.
|
| No 4 (2018) |
THE STUDY OF HARD TURNING OF 105WCr6 STEEL |
(Rus)
|
|
Rastorguev D.A., Sevastiyanov A.A.
|
| No 4 (2018) |
TECHNICAL SOLUTIONS FOR BURNING OF THE DEPRESSED IONIZED GAS FUEL IN THE ELECTRIC FIELD |
(Rus)
|
|
Romanchikov, S.A.
|
| No 4 (2018) |
THE CALCULATION-EXPERIMENTAL DETERMINATION OF PENETRATION OF A SPOT WELDED BY A FIXED ARC |
(Rus)
|
|
Sidorov V.P., Melzitdinova A.V.
|
| No 2 (2018) |
THE INFLUENCE OF THE ELECTROSTATIC FIELD ON THE LASER THERMO-PROCESSING OF METALS |
(Rus)
|
|
Bashmakov D.A., Turichin G.A.
|
| No 2 (2018) |
THE COMPARISON OF THE EXPERIMENTAL DATA AND THE EDUCATED ESTIMATES OF STRENGTH AND ELECTRICAL PROPERTIES OF Cu/Mg COMPOSITES WITH VARIOUS PROPORTIONS OF THE COMPONENTS |
(Rus)
|
|
Volkov A.Y., Kalonov A.A.
|
| No 2 (2018) |
THE DESTRUCTIVE THERMOELASTIC STRESSES CAUSED BY HEAT OUTPUT IN GAZ INCLUSIONS IN COMPOSITE MATERIALS |
(Rus)
|
|
Volokobinsky E.M.
|
| No 2 (2018) |
THE STUDY OF THERMAL CHARACTERISTICS OF GLASS-, CARBON FIBER MATERIALS AND MATERIALS PRODUCED BASING ON THE ADDITIVE TECHNOLOGIES USING 3DP AND FDM TECHNOLOGIES |
(Rus)
|
|
Zlobina I.V., Bekrenev N.V., Pavlov S.P.
|
| No 2 (2018) |
POROSITY DURING THE REPAIR WORK OF TANKS AND PIPELINES FOR TRANSPORTATION OF OIL AND OIL PRODUCTS AND THE MEASURES FOR ITS PREVENTION |
(Rus)
|
|
Kovtunov A.I., Pudovkina N.G., Pudovkin A.A., Maslyaev A.M.
|
| No 2 (2018) |
THE PRODUCTIVE STRATUM COMPLETION USING THE ELECTROHYDRAULIC DRILLING PERFORATOR WITH THE STINGER ROTATING MECHANISM |
(Rus)
|
|
Mesropyan A.V., Rakhmatullina M.R.
|
| No 2 (2018) |
THE STUDY OF KINEMATICS OF INTERACTION OF A GRINDING WHELL WITH A WORKPIECE WHEN APPLYING ULTRASONIC VIBRATIONS |
(Rus)
|
|
Unyanin A.N., Khazov A.V.
|
| No 2 (2018) |
SPECIAL CHARACTERISTICS OF THE DEFORMING MECHANISM DURING STAMPING SHEARING OPERATIONS |
(Rus)
|
|
Shenberger P.N.
|
| No 2-2 (2015) |
DEVELOPMENT AND COMMERCIAL IMPLEMENTATION OF HIGH PERFORMANCE MANUFACTURING AND ENVIRONMENTALLY APPROPRIATE TECHNOLOGY OF SURFACE PLASTIC DEFORMATION OF CARS PARTS |
(Rus)
|
|
Bobrovskiy N.M., Melnikov P.A., Bobrovskiy I.N., Levitskih O.O.
|
| No 2-2 (2015) |
THE STRUCTURE AND CHARACTERISTICS OF THE OVELAP AREAS DURING THE LASER HARDENING OF STEELS AND IRONS |
(Rus)
|
|
Ogin P.A.
|
| No 2-2 (2015) |
EXPERIMENTAL STUDY OF THERMAL PROCESSES WHEN STRENGTHENING THE METAL-CUTTING TOOLS IN LOW -TEMPERATURE PLASMA |
(Rus)
|
|
Brzhozovsky B.M., Martynov V.V., Zinina E.P.
|
| No 2-2 (2015) |
INNOVATIVE METHODS AND CHALLENGES IN HIGH SPEED AND ULTRA-HIGH-SPEED GRINDING |
(Rus)
|
|
Pilinsky A.V.
|
| No 2-2 (2015) |
PROCESS APPROACH TO THE ORGANIZATION OF INFORMATION SYSTEM FOR MATERIALS MACHINABILITY ESTIMATION |
(Rus)
|
|
Vaskin K.Y., Khripunov N.V.
|
| No 2-2 (2015) |
CHOICE OF THE PROTECTIVE DELIMITER OF VOLTAGE ON THE EXAMPLE OF THE PULSE VOLTAGE CONVERTER |
(Rus)
|
|
Pozdnov M.V., Pryadilov A.V.
|
| No 2-2 (2015) |
THE DEVELOPMENT OF A COMPUTER MODEL OF THE «ELECTRIC NETWORK - SEMICONDUCTING COMPENSATOR - RESISTANCE WELDING MACHINE» SYSTEM |
(Rus)
|
|
Glibin Y.S., Shevtsov A.A.
|
| No 2-2 (2015) |
THE PRICIPLES OF SELECTION OF THE ELEMENTS OF PROTECTIVE R-C-VD CIRCUIT USING THE EXAMPLE OF A CONSTANT VOLTAGE PULSE CONVERTER |
(Rus)
|
|
Pozdnov M.V., Pryadilov A.V.
|
| No 2-2 (2015) |
EMPIRICAL TECHNIQUES FOR RESOLVING CONTRADICTIONS IN TECHNICAL PROBLEMS |
(Rus)
|
|
Gordeyev A.V., Borodynkina D.L.
|
| No 2-2 (2015) |
CLASSIFICATION DEVELOPMENT OF CAD/CAM/CAE SYSTEMS FOR SHEET STAMPING BASED ON FACTOR AND CLUSTER ANALYSIS |
(Rus)
|
|
Pochekuev E.N., Puteyev P.A.
|
| No 2-2 (2015) |
METHODOLOGY AND PRACTICE OF ORGANIZING AND CONDUCTING OF SAFETY MONITORING OF WORK TRAINING LABORATORIES |
(Rus)
|
|
Gorina L.N., Danilina N.E., Freze T.Y.
|
| No 2-2 (2015) |
EXPLORATORY DEVELOPMENT OF THE STRUCTURES OF PROGRESSIVE SEPARATING DIES FOR SHEET STAMPING |
(Rus)
|
|
Pochekuev E.N., Shenberger P.N.
|
| No 2-2 (2015) |
THE STUDY OF ACCURACY OF PROCESSING ON PRECISION PRODUCTION EQUIPMENT |
(Rus)
|
|
Gorshkov B.M., Remneva O.Y.
|
| No 2-2 (2015) |
WELDING DEFORMATIONS, «SLACK TEMPERATURES» METHOD AND THE STRENGTHENING OF FIXED COLUMNS OF ROOF STEEL TRUSSES |
(Rus)
|
|
Rodionov I.K., Rodionov I.I.
|
| No 2-2 (2015) |
THE TECHNOLOGY OF ARC WELDING OF SMALL-SIZE COMPONENTS OF NUCLEAR PLANTS UNDER THE SHIELDING GAS HIGH-PRESSURE |
(Rus)
|
|
Kazakov Y.V., Kaplin A.V., Kostyuchenko N.A., Andreev S.A.
|
| No 2-2 (2015) |
THE RESEARCH OF TEMPERATURE DEVIATIONS IN WELDING PROCESS DURING THE DISTURBING ACTIONS |
(Rus)
|
|
Sidorov V.P., Melzitdinova A.V.
|
| No 2-2 (2015) |
THE IMPROVEMENT OF QUALITY OF HARD-ALLOY TOOLS AND PARTS BY MEANS OF CREATION OF SPECIFIED LEVEL OF RESIDUAL STRESS IN THE SURFACE LAYER |
(Rus)
|
|
Kiselyov E.S., Nazarov M.V.
|
| No 2-2 (2015) |
SELECTION OF ABRASIVE WHEELS ACCORDING TO THE GRINDING BURNS OF HARDENED PARTS USING DIGITAL TECHNOLOGIES |
(Rus)
|
|
Soler Y.I., Kazimirov D.Y., Nguyen V.
|
| No 2-2 (2015) |
IMPROVEMENT OF THE EFFICIENCY OF TECHNOLOGY OF ALUMINUM-SILICON ALLOYS MICRO-ARC OXIDATION |
(Rus)
|
|
Krishtal M.M., Ivashin P.V., Polunin A.V., Borgardt E.D., Tverdohlebov A.Y.
|
| No 2-2 (2015) |
ASSESSMENT OF THERMAL CONDITION OF TURNING SCREW TOOLS WITH ANTI-WEAR COATINGS |
(Rus)
|
|
Tabakov V.P., Sagitov D.I.
|
| No 2-2 (2015) |
SIMULATION OF INFLUENCE OF BASING HOLES RELATIVE POSITION ON THE ACCURACY OF LOCATION OF RMS AUTOMATICALLY CHANGEABLE UNITS |
(Rus)
|
|
Levashkin D.G.
|
| No 2-2 (2015) |
THE STUDY OF TEMPERATURE FIELD WHEN GRINDING WITH ULTRASONIC ACTIVATION |
(Rus)
|
|
Unyanin A.N.
|
| No 2-2 (2015) |
QUALITY MANAGEMENT OF THE BLADES SURFACE LAYER UNDER DEEP PROFILE GRINDING |
(Rus)
|
|
Makarov V.F., Nikitin S.P.
|
| No 2-2 (2015) |
MATHEMATICAL MODEL OF FORMING OF MICRORELIEF OF SHAFT JOURNAL WHILE PROCESSING BY DIAMOND BURNISHING |
(Rus)
|
|
Melnikov P.A., Pakhomenko A.N., Lukyanov A.A.
|
| No 2-2 (2015) |
THE ANALYSIS OF HIGH-VOLTAGE PULSE WELDING WITH THE MAGNETIC PULSE DRIVE |
(Rus)
|
|
Merkulov R.V.
|
| No 2-2 (2015) |
COOPERATION BETWEEN THE LEADERS OF THE FIRST TOGLIATTI HIGHER SCHOOL, SELF-GOVERNMENT INSTITUTIONS AND HEADS OF CONSTRUCTION SITES OF THE CITY (IN 1951-1971) |
(Rus)
|
|
Adaevskaya T.I.
|
| No 2-2 (2015) |
PRINCIPLES OF CREATING THE SYSTEM OF COMPUTER-AIDED DESIGN OF PRODUCTION OPERATIONS IN MULTIPRODUCT MANUFACTURING |
(Rus)
|
|
Mitin S.G., Bochkaryov P.Y.
|
| No 2-2 (2015) |
CURRENT STATE OF DEVELOPMENT OF GEOMETRY-GRAPHICS CULTURE AND COMPETENCE OF FUTURE PROFESSIONALS |
(Rus)
|
|
Amirdzhanova I.Y., Vitkalov V.G.
|
| No 2-2 (2015) |
THE TECHNOLOGY OF PRODUCING OF STAMP-WELDED LIGHT WEIGHT CASES FOF ELECTRICAL CABLE SEALING |
(Rus)
|
|
Nescoromny S.V., Strizhakov Y.L.
|
| No 2 (2019) |
HEAT GENERATION OF NANOMODIFIED ELECTRICALLY-CONDUCTIVE POLYURETHANE DURING THE FLOW OF DIRECT CURRENT |
(Rus)
|
|
Yagubov V.S., Shchegolkov A.V.
|
| No 4 (2019) |
CONCERNING THE MELTING OF AN ALUMINIUM ELECTRODE BY THE ARGON ARC OF STRAIGT POLARITY |
(Rus)
|
|
Sidorov V.P., Sovetkin D.E., Borisov N.A.
|
| No 3 (2019) |
THE STUDY OF POWER CHARACTERISTICS OF ADAPTIVE MAGNETIC DAMPER |
(Rus)
|
|
Kozhukhov E.A., Petrovsky E.A., Bashmur K.A.
|
| No 4 (2019) |
THE INFLUENCE OF LOW-TEMPERATURE PLASMA MODIFICATION WITH CARBON AND NITROGEN ON THE HARDENING AND SURFACE ROUGHNESS OF AUSTENITIC STAINLESS STEEL |
(Rus)
|
|
Skorynina P.A., Makarov A.V., Menshakov A.I., Osintseva A.L., Chalina M.A.
|
| No 3 (2019) |
THERMODYNAMIC ANALYSIS OF THE SOLUTION SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS OF COPPER AND COPPER OXIDE NANOPARTICLES |
(Rus)
|
|
Moiseev N.V., Novikov V.A., Amosov A.P.
|
| No 4 (2019) |
THE OXIDATION PROCESS IN THE TEXTURED THIN TAPES OF BINARY COPPER-BASED ALLOYS |
(Rus)
|
|
Suaridze T.R., Khlebnikova Y.V., Rodionov D.P., Egorova L.Y.
|
| No 3 (2019) |
THE INFLUENCE OF STRAIN-INDUCED DEFECTS ON PHASE AND ELEMENTAL COMPOSITION OF HARDENED SURFACE LAYERS OF AUSTENITIC STAINLESS STEEL FORMED DURING ION-PLASMA TREATMENT |
(Rus)
|
|
Moskvina V.A., Astafurova E.G., Ramazanov K.N., Maier G.G., Astafurov S.V., Panchenko M.Y., Melnikov E.V., Zagibalova E.A.
|
| No 4 (2019) |
DIFFERENCES IN THE LOCAL ATOMIC STRUCTURE OF THE AMORPHOUS TI2NICU ALLOYS PRODUCED BY MELT QUENCHING AND LARGE PLASTIC DEFORMATIONS |
(Rus)
|
|
Sundeev R.V., Shalimova A.V., Glezer A.M., Veligzhanin A.A.
|
| No 3 (2019) |
IDENTIFICATION OF FATIGUE CRACK ZONES IN VERY HIGH CYCLE FATIGUED 42CrMo4 STEEL WITH THE USE OF QUANTITATIVE FRACTOGRAPHY |
(Rus)
|
|
Seleznev M.N., Merson E.D.
|
| No 3 (2019) |
CREATION OF MOLYBDENUM-COPPER COMPOSITES USING THE SPARK PLASMA SINTERING METHOD AND THE STUDY OF THEIR CHARACTERISTIC |
(Rus)
|
|
Sivkov A.A., Ivashutenko A.S., Shanenkova Y.L., Vympina Y.N.
|
| No 3 (2019) |
TECHNOLOGICAL ASPECTS OF FRICTION TREATMENT OF PG-SR2 COATING FORMED BY LASER CLADDING |
(Rus)
|
|
Soboleva N.N., Makarov A.V., Malygina I.Y.
|
| No 3 (2019) |
TITANIUM-ZIRCONIUM COATINGS FORMED BY ELECTRICAL EXPLOSION METHOD ON A TITANIUM IMPLANT SURFACE |
(Rus)
|
|
Sosnin K.V., Romanov D.A., Gromov V.E., Ivanov Y.F.
|
| No 3 (2019) |
MAXIMUM COMBUSTION PRESSURE AND ITS RELATIONSHIP WITH THE CHARACTERISTICS OF COMBUSTION IN SPARK IGNITION ENGINES |
(Rus)
|
|
Shaikin A.P., Deryachev A.D., Sazonov M.V., Khlopotkin S.S.
|
| No 3 (2024) |
Microstructure, crystallographic texture and mechanical properties of the Zn–1%Mg–1%Fe alloy subjected to severe plastic deformation |
(Rus)
(Eng)
|
|
Sitdikov V.D., Khafizova E.D., Polenok M.V.
|
| No 2 (2019) |
CARBON DIOXIDE CORROSION OF OILFIELD CASING AND TUBULAR GOODS IN MEDIA SATURATED WITH H2S AND Cl |
(Rus)
|
|
Vyboyshchik M.A., Zyryanov A.O., Gruzkov I.V., Fedotova A.V.
|
| No 3 (2019) |
PRODUCTION OF NANOCOMPOSITE WO3/rGO ELECTROCHROMIC FILMS BY THE METHOD OF SPRAY-PYROLYSIS ON GLASS ITO SUBSTRATES |
(Rus)
|
|
Shchegolkov A.V., Shchegolkov A.V.
|
| No 2 (2019) |
TEST STAND FOR LOW-FREQUENCY CALIBRATION OF ACCELEROMETERS |
(Rus)
|
|
Zakharchenko M.Y., Kuznetsov A.O., Yakovishin A.S., Batischev V.P., Kostyanchuk B.N., Zakharov O.V.
|
| No 4 (2019) |
THE PLANT FOR TESTING COATINGS SAMPLES UNDER VARIABLE LOADS |
(Rus)
|
|
Venediktov A.N., Venediktov N.L.
|
| No 2 (2019) |
COMPLEX PARAMETER OF DURABILITY OF SUPPORT PLATES OF CUTTING ELEMENTS OF BLOCK-MODULAR CUTTERS |
(Rus)
|
|
Kravtsov A.N.
|
| No 4 (2019) |
EFFECT OF IRON CONCENTRATION ON CRYSTALLIZATION OF AN AMORPHOUS ALLOY OF CO-FE-B-NB SYSTEM |
(Rus)
|
|
Volkov N.A., Abrosimova G.E.
|
| No 2 (2019) |
INFLUENCE OF FORGING FORCE ON THE FORMATION OF THE STRUCTURE AND MECHANICAL PROPERTIES OF MEDIUM-CARBON STEELS WELDED JOINTS IN ROTARY FRICTION WELDING |
(Rus)
|
|
Kuzmina E.A., Priymak E.Y.
|
| No 4 (2019) |
THE FORMATION OF THE BANK OF GAITS FOR A CRAWLING SEARCH ROBOT WITH CONTROLLABLE FRICTION IN BEARING SUPPORTS |
(Rus)
|
|
Vorochaeva L.Y., Savin S.I.
|
| No 2 (2019) |
THE ROUGHNESS OF TREATED SURFACE UNDER THE ULTRASONIC SUPERFINISHING OF DETAILS FROM VT3-1 AND VT 22 TITANIUM ALLOYS |
(Rus)
|
|
Ladyagin R.V., Sitkina L.P., Razumova I.N.
|
| No 4 (2019) |
THE INTERRELATION OF THE SIZES AND PHASE COMPOSITION OF ZR-BASED BULK AMORPHOUS ALLOYS |
(Rus)
|
|
Drozdenko A.A., Matveev D.V., Pershina E.A., Aronin A.S.
|
| No 2 (2019) |
ON THE EFFICIENCY OF FUZZY LOGIC APPLICATIONS IN HYDRAULIC ACTUATOR CONTROL SYSTEMS |
(Rus)
|
|
Mesropyan A.V., Sharipov R.R.
|
| No 4 (2019) |
SOME PRACTICAL CONCERNS RELATED TO COMPUTER PROCEDURES OF PROCESSING IMAGES IN MATERIAL SCIENCE |
(Rus)
|
|
Kudrya A.V., Sokolovskaya E.A., Perezhogin V.Y., Ha N.N.
|
| No 2 (2019) |
THE STUDY OF INFLUENCE OF ULTRASONIC DRESSING ON THE ENERGY-FORCE INDICATORS OF CYLINDRICAL PLUNGE GRINDING |
(Rus)
|
|
Murashkin S.V., Selivanov A.S., Malyshev V.I.
|
| No 4 (2019) |
THE ELASTOPLASTIC PROPERTIES OF THE TRABECULAR BONE TISSUE |
(Rus)
|
|
Panfilov G.P., Gilev M.V., Izmodenova M.Y., Zaytsev D.V.
|
| 201 - 285 of 285 Items |
<< < 1 2 3
|
