Email this article Influence of tool geometry on the formation of welded joint during friction stir welding of the AA5083 aluminum alloy
- Authors: Zybin I.N.1, Buzyreva D.A.1
-
Affiliations:
- Kaluga Branch of Bauman Moscow State Technical University
- Issue: No 2 (2024)
- Pages: 43-52
- Section: Articles
- URL: https://vektornaukitech.ru/jour/article/view/938
- DOI: https://doi.org/10.18323/2782-4039-2024-2-68-4
- ID: 938
Cite item
Abstract
One of the important parameters influencing the formation of a weld during friction stir welding is the tool geometry, which affects the processes of heat generation and stirring of metals in their connection zone. These processes influence the formation of a high quality and strength welded joint without continuity defects. In this regard, it is relevant to analyze the influence of tool geometry on the welding mode parameters, at which the welded joint is formed without continuity defects, as well as on the welded joint strength under static tension. The work considers the influence of the cylindrical and conical shapes of the tool pin, as well as the conical shape of the pin with a thread on its outer surface and a spiral groove on the end surface of the tool shoulder on the welding mode parameters, at which the welded joint is formed without continuity defects. The study shows that changing the shape of the pin working surface from cylindrical to a conical one had no effect on the range of welding mode parameters, at which the welded joint is formed without continuity defects. It has been found that the presence of a thread on the pin outer surface and a groove on the end surface of a tool shoulder allows producing welded joints without continuity defects in a wider range of welding mode parameters compared to a simpler tool geometry. The macrostructure of the resulting welded joints was considered. It has been found that the studied tool geometry has almost no influence on the maximum strength values of welded joints produced by friction stir welding and reaches 95 % of the strength of the base metal.
About the authors
Igor N. Zybin
Kaluga Branch of Bauman Moscow State Technical University
Author for correspondence.
Email: igor.zybin@bmstu.ru
ORCID iD: 0000-0002-5738-4231
PhD (Engineering), Associate Professor, assistant professor of Chair “Technologies of Connection and Processing of Materials”
Russian Federation, 248000, Russia, Kaluga, Bazhenov Street, 2Darya A. Buzyreva
Kaluga Branch of Bauman Moscow State Technical University
Email: dasha.buzyreva@bk.ru
graduate student
Russian Federation, 248000, Russia, Kaluga, Bazhenov Street, 2References
- Arbegast W.J. Friction stir welding after a decade of development. Welding Journal, 2006, vol. 85, no. 3, pp. 28–35.
- Okamura H., Aota K., Ezumi M. Friction stir welding of aluminum alloy and application to structure. Journal of Japan Institute of Light Metals, 2000, vol. 50, no. 4, pp. 166–172. doi: 10.2464/jilm.50.166.
- Manigandan K., Senthilkumar S. Review of friction stir welding tools. Journal of Advanced Engineering Research, 2018, vol. 5, no. 1, pp. 41–51.
- Chandrashekar A., Ajay Kumar B.S., Reddappa H.N. Friction stir welding: tool Material and geometry. AKGEK International Journal of Technology, 2015, vol. 6, no. 1, pp. 16–20.
- Yang Min, Bao Rui-jun, Liu Xiu-zhong, Song Chao-qun. Thermo-mechanical interaction between aluminum alloy and tools with different profiles during friction stir wielding. Transactions of Nonferrous Metals Society of China, 2019, vol. 29, no. 3, pp. 495–506. doi: 10.1016/S1003-6326(19)64958-7.
- Kumar P.M., Anbumalar V., Ramesh Babu K.R. A Review on progress of different types of friction stir welding tool geometry design. Australian Journal of Basic and Applied Sciences, 2014, vol. 16, no. 8, pp. 364–371.
- Ratković N., Jovanović Pešić Ž., Arsić D., Pešić M., Džunić D. Tool geometry effect on material flow and mixture in FSW. Advanced Technologies & Materials, 2022, vol. 47, no. 2, pp. 33–36. doi: 10.24867/ATM-2022-2-006.
- Zhang Y.N., Cao X., Larose S., Wanjara P. Review of tools for friction stir welding and Processing. Canadian Metallurgical Quarterly, 2012, vol. 51, no. 3, pp. 250–261. doi: 10.1179/1879139512Y.0000000015.
- Ambrosio D., Morisada Y., Ushioda Y., Fujii H. Material flow in friction stir welding: A review. Journal of Materials Processing Technology, 2023, vol. 320, article number 118116. doi: 10.1016/j.jmatprotec.2023.118116.
- Kumar R., Pancholi V. Three-dimensional material flow during friction stir welding of AA5083. Journal of Manufacturing Processes, 2021, vol. 68-A, pp. 1214–1223. doi: 10.1016/j.jmapro.2021.06.051.
- Mohanty H.K., Mahapatra M.M., Kumar P., Biswas P., Mandal N.R. Effect of tool shoulder and pin probe profiles on friction stirred aluminum welds – a comparative study. Journal of Marine Science and Application, 2012, vol. 11, pp. 200–207. doi: 10.1007/s11804-012-1123-4.
- Meshram S., Madhusudhan Reddy G., Venugopal Rao V. Role of threaded tool pin profile and rotational speed on generation of defect free friction stir AA 2014 aluminium alloy welds. Defence Science Journal, 2016, vol. 66, no. 1, pp. 57–63. doi: 10.14429/dsj.66.8566.
- Hassan Kh.A.A., Prangnell P.B., Norman A.F., Price D.A., Williams S.W. Effect of welding parameters on nugget zone microstructure and properties in high strength aluminium alloy friction stir welds. Science and Technology of Welding and Joining, 2003, vol. 8, no. 4, pp. 257–268. doi: 10.1179/136217103225005480.
- Jiang Tao, Wu ChuanSong, Shi Lei. Effects of tool pin thread on temperature field and material mixing in friction stir welding of dissimilar Al/Mg alloys. Journal of Manufacturing Processes, 2022, vol. 74, pp. 112–122. doi: 10.1016/j.jmapro.2021.12.008.
- Vijayavel P., Balasubramanian V., Sundaram S. Effect of shoulder diameter to pin diameter (D/d) ratio on tensile strength and ductility of friction stir processed LM25AA-5% SiCp metal matrix composites. Materials and Design, 2014, vol. 57, pp. 1–9. doi: 10.1016/j.matdes.2013.12.008.
- Vijayavel P., Sundararajan T., Rajkumar I., Ananthakumar K. Effect of tool diameter ratio of tapered cylindrical profile pin on wear characteristics of friction stir processing of Al–Si alloy reinforced with SiC ceramic particles. Metal Powder Report, 2021, vol. 76, no. 2, pp. 75–89. doi: 10.1016/j.mprp.2020.04.005.
- Gusarova A.V., Rubtsov V.E., Kolubaev E.A., Bakshaev V.A., Nikitin Yu.V. The influence of the rolling direction of AA5056 on the microstructure and properties of weld joints obtained by friction stir welding. Obrabotka metallov / Metal working and material science, 2020, vol. 22, no. 4, pp. 124–136. doi: 10.17212/1994-6309-2020-22.4-124-136.
- Alemdar A.S.A., Jalal S.R., Mulapeer M.M. Effect of exfoliation corrosion on the efficient hybrid joint of AA2024-T3 and AA2198-T8 formed by friction stir welding. Heliyon, 2023, vol. 9, no. 6, article number e16577. doi: 10.1016/j.heliyon.2023.e16577.
- Sizova O.V., Kolubaev A.V., Kolubaev E.A., Zaikina A.A., Rubtsov V.E. Fracture of friction stir welded butt joints structure of aluminum-magnesium alloy. Obrabotka metallov / Metal working and material science, 2014, no. 3, pp. 14–20. EDN: SKXOBD.
- Dawood H.I., Mohammed K.S., Rahmat A., Uday M.B. Effect of small tool pin profiles on microstructures and mechanical properties of 6061 aluminum alloy by friction stir welding. Transactions of Nonferrous Metal Society of China, 2015, vol. 25, no. 9, pp. 2856−2865. doi: 10.1016/S1003-6326(15)63911-5.
- Poklyatskiy A.G. Parameters of FSW process of thin sheet aluminium alloys. Vestnik of Polotsk State University. Part B. Industry. Applied Sciences, 2015, no. 11, pp. 53–58. EDN: UOHBAH.
- Sizova O.V., Kolubaev A.V., Kolubaev E.A., Zaikina A.A., Rubtsov V.E. Effect of main parameters of the friction stir welding on structure imperfections of welded joint. Obrabotka metallov / Metal working and material science, 2017, no. 4, pp. 19–29. doi: 10.17212/1994-6309-2017-4-19-29.
- Ovchinnikov V.V., Drits A.M. Technological peculiarities of friction welding with Al–Mg aluminum alloys stir. Science intensive technologies in mechanical, 2019, no. 3, pp. 7–20. doi: 10.30987/article_5c7434ed5317f2.05345899.
Supplementary files
