Acoustic properties of 15-5 PH maraging steel after energy deposition

Cover Page

Cite item

Full Text

Abstract

The study of the acoustic properties of maraging steels operated under various energy force and temperature actions is a critical task, since it is the method of acoustic structuroscopy that provides the most reliable connection with the structure, stress-strain state and mechanical properties of steels. The paper is devoted to research of the acoustic properties of the 15-5 PH maraging steel samples under various types of heat treatment under the conditions of mechanical tensile and cyclic loads. Samples of the 15-5 PH maraging steel were studied in three structural states: solid solution annealing and subsequent aging at 470 and 565 °C; during tensile tests; during cyclic tension-compression loading. The research used a unique scientific installation “Information-measuring complex for investigation of acoustic properties of materials and products”. It implements the acoustic mirror-shadow multiple reflections method using electromagnetic-acoustic and piezoelectric transducers based on polyvinylidene fluoride film to excite and receive waves and allows determining the velocity of wave propagation with an error of no more than 2 m/s. The acoustic (wave velocity, elastic moduli, electromagnetic-acoustical (EMA) transformation coefficients, acoustic anisotropy coefficients, acoustoelastic coupling coefficients) and electromagnetic (coercive force and electrical conductivity) characteristics of the samples were examined. The samples were studied in the initial state (before loading); stepwise in the process of tensile loads and subsequent unloading; after tensile tests; during cyclic tension-compression loading. It was revealed that the following acoustic parameters of 15-5 PH steel samples are the greatest structural sensitivity to mechanical tensile load and cyclic loading: transverse wave velocity, Poisson’s ratio, double EMA-transformation coefficient, and acoustic anisotropy coefficient.

About the authors

Olga V. Muravieva

Kalashnikov Izhevsk State Technical University
Udmurt Federal Research Center of the Ural branch of the RAS

Email: olgak166@mail.ru
ORCID iD: 0000-0003-3442-8163

Doctor of Sciences (Engineering), Professor, professor of Chair “Instruments and Methods of Measurements, Testing, Diagnostics”

Russian Federation, Address 1: 426069, Russia, Izhevsk, Studencheskaya Street, 7. Address 2: 426067, Russia, Izhevsk, Tatiana Baramzina Street, 34

Vitaly V. Muraviev

Kalashnikov Izhevsk State Technical University
Udmurt Federal Research Center of the Ural branch of the RAS

Email: vmuraviev@mail.ru
ORCID iD: 0000-0001-8590-1382

Doctor of Sciences (Engineering), Professor, professor of Chair “Instruments and Methods of Measurements, Testing, Diagnostics”

Russian Federation, Address 1: 426069, Russia, Izhevsk, Studencheskaya Street, 7. Address 2: 426067, Russia, Izhevsk, Tatiana Baramzina Street, 34

Lyudmila V. Volkova

Kalashnikov Izhevsk State Technical University

Email: ludmila396@rambler.ru
ORCID iD: 0000-0001-5128-6465

PhD (Engineering), Associate Professor, assistant professor of Chair “Instruments and Methods of Measurements, Testing, Diagnostics”

Russian Federation, 426069, Russia, Izhevsk, Studencheskaya Street, 7

Aleksey L. Vladykin

Kalashnikov Izhevsk State Technical University

Author for correspondence.
Email: pmkk@istu.ru
ORCID iD: 0009-0006-1813-2011

postgraduate student

Russian Federation, 426069, Russia, Izhevsk, Studencheskaya Street, 7

Konstantin Yu. Belosludtsev

Kalashnikov Izhevsk State Technical University

Email: kostya.belka99@yandex.ru

graduate student

Russian Federation, 426069, Russia, Izhevsk, Studencheskaya Street, 7

References

  1. Eremin E.N., Losev A.S., Ponomarev I.A., Borodikhin S.A. Thermal treatment impact upon structure, properties and phase structure of steel 10G7M3S2AFTYU weld with powder wire. Science intensive technologies in mechanical engineering, 2020, no. 5, pp. 3–8. doi: 10.30987/2223-4608-2020-5-3-8.
  2. Gromov V.I., Yakusheva N.A., Polunov I.L. Evaluation of the effect of heat treatment on mechanical properties of maraging steels in the alloying system Fe–Ni–Mo–Ti–Al. Trudy VIAM (Proceedings of VIAM), 2017, no. 11, pp. 12–20. doi: 10.18577/2307-6046-2017-0-11-2-2.
  3. Couturier L., De Geuser F., Deschamps A. Microstructural evolution during long time aging of 15–5PH stainless steel. Materialia, 2020, vol. 9, article number 100634. doi: 10.1016/j.mtla.2020.100634.
  4. Niu Jingpeng, Cui Bing, Jin Huijin, Yan Jialing, Meng Wei, Min Chunying, Xu Dong. Effect of Post-Weld Aging Temperature on Microstructure and Mechanical Properties of Weld Metal of 15-5 PH. Journal of Materials Engineering and Performance, 2020, vol. 29, pp. 7026–7033. doi: 10.1007/s11665-020-05193-y.
  5. Jin Chunhui, Zhou Honglin, Lai Yuan, Li Bei, Zhang Kewei, Chen Huiqin Zhao Jinhua. Microstructure and mechanical properties of 15-5 PH stainless steel under different aging temperature. Metallurgical Research and Technology, 2021, vol. 118, no. 6, article number 601. doi: 10.1051/metal/2021078.
  6. Valiorgue F., Zmelty V., Dumas M., Chomienne V., Verdu C., Lefebvre F., Rech J. Influence of residual stress profile and surface microstructure on fatigue life of a 15-5PH. Procedia Engineering, 2018, vol. 213, pp. 623–629. doi: 10.1016/j.proeng.2018.02.058.
  7. Zhou Tao, Faleskog J., Babu R.P., Odqvist J., Yu Hao, Hedström P. Exploring the relationship between the microstructure and strength of fresh and tempered martensite in a maraging stainless steel Fe–15Cr–5Ni. Materials Science and Engineering: A, 2019, vol. 745, pp. 420–428. doi: 10.1016/j.msea.2018.12.126.
  8. Avula I., Arohi A.Ch., Kumar Ch.S., Sen I. Microstructure, Corrosion and Mechanical Behavior of 15-5 PH Stainless Steel Processed by Direct Metal Laser Sintering. Journal of Materials Engineering and Performance, 2021, vol. 30, pp. 6924–6937. doi: 10.1007/s11665-021-06069-5.
  9. Nong X.D., Zhou X.L., Li J.H., Wang Y.D., Zhao Y.F., Brochu M. Selective laser melting and heat treatment of precipitation hardening stainless steel with a refined microstructure and excellent mechanical properties. Scripta Materialia, 2020, vol. 178, pp. 7–12. doi: 10.1016/j.scriptamat.2019.10.040.
  10. Sarkar S., Mukherjee S., Kumar Ch.S., Nath A.K. Effects of heat treatment on microstructure, mechanical and corrosion properties of 15-5 PH stainless steel parts built by selective laser melting process. Journal of Manufacturing Processes, 2020, vol. 150, pp. 279–294. doi: 10.1016/j.jmapro.2019.12.048.
  11. Sarkar S., Kumar Ch.S., Nath A.K. Effects of heat treatment and build orientations on the fatigue life of selective laser melted 15-5 PH stainless steel. Materials Science and Engineering: A, 2019, vol. 755, pp. 235–245. doi: 10.1016/j.msea.2019.04.003.
  12. Gorkunov E.S., Povolotskaya A.M., Zadvorkin S.M., Putilova E.A., Mushnikov A.N., Bazulin E.G., Vopilkin A.K. Some features in the behavior of magnetic and acoustic characteristics of hot-rolled 08G2B steel under cyclic loading. Russian Journal of Nondestructive Testing, 2019, vol. 55, no. 11, pp. 827–836. doi: 10.1134/S0130308219110034.
  13. Takeda S., Uchimoto T., Kita A., Matsumoto T., Sasaki T. Mechanism study of the residual stress evaluation of low-carbon steels using the eddy current magnetic signature method. Journal of Magnetism and Magnetic Materials, 2021, vol. 538, article number 168268. doi: 10.1016/j.jmmm.2021.168268.
  14. Mishakin V.V., Gonchar A.V., Klyushnikov V.A., Kurashkin K.V. Study of the effect of plastic deformation on the crystallographic texture and acoustic characteristics of low-alloy steel. Problems of Strength and Plasticity / Problemy prochnosti i plastichnosti, 2021, vol. 83, no. 3, pp. 255–264. doi: 10.32326/1814-9146-2021-83-3-255-264.
  15. Gonchar A.V., Klyushnikov V.A., Mishakin V.V. The effect of plastic deformation and subsequent heat treatment on the acoustic and magnetic properties of 12Khl8N10T steel. Industrial laboratory. Diagnostics of materials, 2019, vol. 85, no. 2, pp. 23–28. doi: 10.26896/1028-6861-2019-85-2-23-28.
  16. Mishakin V.V., Gonchar A.V., Kurashkin K.V., Klyushnikov V.A., Kachanov M. On low-cycle fatigue of austenitic steel. Part I: Changes of Poisson’s ratio and elastic anisotropy. International Journal of Engineering Science, 2021, vol. 168, article number 103567. doi: 10.1016/j.ijengsci.2021.103567.
  17. Uglov A.L., Khlybov A.A., Bychkov A.L., Kuvshinov M.O. About Non-Destructive Control of Residual Stresses in Axisymmetric Parts Made of Steel 03Ni17Co10W10MoTi. Vestnik IzhGTU imeni M.T. Kalashnikova, 2019, vol. 22, no. 4, pp. 3–9. doi: 10.22213/2413-1172-2019-4-3-9.
  18. Muravev V.V., Lenkov S.V., Tapkov K.A. In-production nondestructive testing of internal stresses in rails using acoustoelasticity method. Russian Journal of Nondestructive Testing, 2019, vol. 55, no. 1, pp. 8–14. doi: 10.1134/S01303082190100020.
  19. Khlybov A.A., Kabaldin Yu.G., Ryabov D.A., Anosov M.S., Shagatin D.A. Study of the damage to 12Cr18Ni10Ti steel samples under low cycle fatigue using methods of nondestructive control. Industrial laboratory. Diagnostics of materials, 2021, vol. 87, no. 5, pp. 61–67. doi: 10.26896/1028-6861-2021-87-5-61-67.
  20. Muraveva O.V., Muravev V.V., Basharova A.F., Sintsov M.A., Bogdan O.P. Thermal treatment effect and structural state of rod-shaped assortment 40Kh steel on the speed of ultrasound waves and poisson coefficient. Steel in Translation, 2020, vol. 50, no. 8, pp. 579–584. EDN: MKTWDN.
  21. Muravev V.V., Muraveva O.V., Vagapov T.R., Makarova V.E., Stepanova E.A. Acoustic and electromagnetic properties of civilian gun blanks. Intelligent Systems in Manufacturing, 2023, vol. 21, no. 1, pp. 59–70. EDN: KBBVGW.
  22. Muravev V.V., Budrin A.Yu., Sintsov M.A. Influence of high-cycle fatigue on the speed of shear and Rayleigh waves in steel bars of different heat treatment. Intelligent Systems in Manufacturing, 2020, vol. 18, no. 4, pp. 4–10. doi: 10.22213/2410-9304-2020-4-10.
  23. Muravev V.V., Budrin A.Yu., Sintsov M.A. Structuroscopy of heat-treated steel bars by the speed of propagation of Rayleigh waves. Intelligent Systems in Manufacturing, 2020, vol. 18, no. 2, pp. 37–43. doi: 10.22213/2410-9304-2020-2-37-43.
  24. Muraveva O.V., Brester A.F., Muravev V.V. Сomparative sensitivity of informative parameters of electromagnetic-acoustic mirror-shadow multiple reflections method during bar stock testing. Russian Journal of Nondestructive Testing, 2022, vol. 58, no. 8, pp. 689–704. EDN: BQEKGO.
  25. Kazantseva N.V., Merkushev A.G., Shishkin D.A., Ezhov I.V., Davidov D.I., Rigmant M.B., Terentev P.B., Egorova L.Yu. Magnetic Properties and Structure of Products from 1.4540 Stainless Steel Manufactured by 3D Printing. Physics of Metals and Metallography, 2019, vol. 120, pp. 1270–1275. doi: 10.1134/S0031918X19130118.

Supplementary files

Supplementary Files
Action
1. JATS XML
Download

Copyright (c) 2024 Muravieva O.V., Muraviev V.V., Volkova L.V., Vladykin A.L., Belosludtsev K.Y.

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

This website uses cookies

You consent to our cookies if you continue to use our website.

About Cookies